The Nextivity CEL-FI GO G41 cell phone signal booster provides maximum gain for the carrier of your choice. Other home boosters amplify signals from all carriers simultaneously at a lower level of gain; the CEL-FI GO G41 amplifies one carrier at a time—Verizon, AT&T, T‑Mobile, UScellular, or GCI Alaska—and provides stronger signal gain on that carrier’s clearest frequencies.
This custom GO G41 kit, available only from Powerful Signal, lets you choose one of three high-gain outdoor antennas; use the antenna that works best for your location. It also includes your choice of up to four inside ceiling-mounted dome antennas or flex-mount panel antennas; choose the antenna type and configuration that best meets your needs.
The CEL-FI GO G41 helps you stay connected and experience fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in areas with weak cell service and in buildings that block outside cell signal.
Powerful Signal’s CEL-FI GO G41 system can be configured with one to four inside antennas to match your home’s configuration and meet your improved signal needs.
You’ll need access to an attic or crawlspace above the ceiling to pull cable and mount the dome antennas.
The panel antennas can be mounted on walls or ceilings. They also stand upright on flat surfaces.
The Nextivity WAVE app for smartphones lets you check your CEL-FI GO G41 booster’s status and change its settings:
This is a complete kit, with everything you need to start getting the best signal.
A one-antenna CEL-FI GO G32 system will cover most homes of typical size. Homes that are long and narrow, have more than two floors, or have specific problem areas can use two, three, or four inside antennas to distribute the signal coverage. Connect one length of coax cable to the outside antenna and one or more of the other lengths to the inside antenna; use the barrel connector to attach two lengths of cable together, if necessary, remembering to always use the shortest lengths of cable possible.
All kits include:
Using Nextivity’s 4th-generation IntelliBoost signal processing chip, the CEL-FI GO G41 receives the outside cell signal, amplifies it, and rebroadcasts it inside your home or small office through one to four inside antennas. This allows you to stay connected in areas where cell service is poor or where building materials interfere with signals from the local cell tower.
This complete kit includes your choice of a high-gain outdoor antenna and one to four indoor dome or panel antennas. Here are some general guidelines for choosing and using the right antennas.
Outside (donor) antenna:
Inside (broadcast) antenna:
If you’re uncertain which antennas will work best for you, please call us at 435-634-6800. Our technical support representatives will be happy to discuss your specific requirements and give you a recommendation based on years of professional experience.
The coverage area this Rural Signal Booster can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
For warranty information on this product, please see our Nextivity warranty information page.
Questions & Answers