The CEL-FI GO G32 is an in-building cell signal booster that provides maximum gain for the carrier of your choice. Other home boosters amplify signals from all carriers simultaneously with lower signal gain; the CEL-FI GO G32 amplifies one carrier at a time—your choice of Verizon, AT&T, T‑Mobile, UScellular, or GCI Alaska—and provides stronger signal gain on that carrier’s best frequencies.
The CEL-FI GO G32 helps you stay connected and experience fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in areas with weak cell service and in buildings that block outside cell signal.
Powerful Signal’s CEL-FI GO G32 system can be configured with one to four inside antennas to match your home’s configuration and meet your improved signal needs.
You’ll need access to an attic or crawlspace above the ceiling to pull cable and mount these antennas.
The Nextivity WAVE app for smartphones lets you check your CEL-FI GO G32 booster’s status and change its settings:
This is a complete kit, with everything you need to start getting the best signal.
A one-antenna CEL-FI GO G32 system will cover most homes of typical size. Homes that are long and narrow, have more than two floors, or have specific problem areas can use two, three, or four inside antennas to distribute the signal coverage. Connect one length of coax cable to the outside antenna and one or more of the other lengths to the inside antenna; use the barrel connector to attach two lengths of cable together, if necessary, remembering to always use the shortest lengths of cable possible.
All kits include:
Using Nextivity’s IntelliBoost signal processing, the CEL-FI GO G32 receives the outside cell signal, amplifies it, and rebroadcasts it inside your home or small office through one to four inside antennas. This allows you to stay connected in areas where cell service is poor or where building materials interfere with signals from the local cell tower.
This CEL-FI GO G32 Smart Signal Booster system works with Verizon, AT&T, T‑Mobile, UScellular, and GCI Alaska 5G and 4G/LTE cellular bands. It does not work with other cellular networks.
The CEL-FI GO G32 operates on two cellular bands simultaneously from a single carrier. It will support only one carrier at a time.
Not sure which bands your phone uses? Contact us—our technical support reps will be happy to help you!
The coverage area this system can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
For warranty information on this product, please see our Nextivity warranty information page.
Questions & Answers