The Cel-Fi GO X cell signal booster provides maximum gain for the carrier of your choice. Other home boosters amplify all carriers simultaneously with lower signal gain; the Cel-Fi GO X amplifies one carrier at a time—your choice of Verizon, AT&T, T‑Mobile, Sprint, UScellular, or GCI Alaska—and provides stronger signal gain on that carrier’s best frequencies.
For the best possible signal, this system combines the Cel-Fi GO X with a high-gain wideband donor antenna. The high-gain LPDA (directional) antenna has an average of 2½ times the gain (+4 dB) of a standard LPDA antenna, while the high-gain omnidirectional antenna has 60 percent more gain (+2 dB) than a typical omni antenna.
The Cel-Fi GO X Rural cell signal booster gives you strong signal for faster cellular data and fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in remote areas with weak cell service.
This system gives you the choice of a high-gain outdoor directional or omnidirectional antenna. Here are some general guidelines for selecting the right antenna.
If you’re still not certain which antenna will work best for you, please call us at 866-912-3444. Our technical support representatives will be happy to discuss your specific requirements and give you a recommendation based on years of professional experience.
The Cel-Fi WAVE app for smartphones lets you check your Cel-Fi GO booster’s status and change its settings:
This is a complete kit, with everything you need to start getting the best signal:
Using Nextivity’s IntelliBoost signal processing, the Cel-Fi GO X receives the outside cell signal, amplifies it, and rebroadcasts it inside your home through a wall-mounted panel antenna. This allows you to stay connected in areas where cell service is poor or where building materials interfere with signals from the local cell tower.
This Cel-Fi GO X Rural cell signal booster system works with Verizon 5G/4G LTE cellular bands and AT&T, T‑Mobile, Sprint, UScellular, and GCI Alaska 5G/4G LTE/3G cellular bands. It does not work with other cellular networks, and it does not boost Verizon 3G.
The Cel-Fi GO X operates on two cellular bands simultaneously from a single carrier. It amplifies only one carrier at a time.
Not sure which bands your phone uses? Contact us—our technical support reps will be happy to help you!
The Top Signal EDGE panel antenna has four installation configurations:
The back of the panel includes a channel for the pigtail cable so it will mount flush against walls and ceilings.
Command® is a registered trademark of 3M.
The coverage area this system can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866-912-3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For warranty information on this product, please see our Cel-Fi warranty information page.
Questions & Answers