The Cel-Fi GO G32 cell signal booster provides maximum gain for the carrier of your choice. Other home boosters amplify all carriers simultaneously with lower signal gain; the Cel-Fi GO G32 amplifies one carrier at a time—your choice of Verizon, AT&T, T‑Mobile, UScellular, or GCI Alaska—and provides stronger signal gain on that carrier’s best frequencies.
For the best possible reception from distant or weak cell towers, this system combines the Cel-Fi GO G32 with a high-gain grid parabolic antenna. This antenna has up to 25 times the gain of a standard LPDA antenna⭷ and up to 15 times the gain of our high-gain LPDA⭷.
The Cel-Fi GO G32 Rural cell signal booster gives you strong signal for faster cellular data and fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in remote areas with weak cell service.
This system includes a high-gain grid parabolic outdoor antenna. Here are some guidelines for deciding if this is the right antenna for you.
If you’re not certain if this antenna is the best option for you, please call us at 435-634-6800. Our technical support representatives will be happy to discuss your specific requirements and give you a recommendation based on years of professional experience.
The Cel-Fi WAVE app for smartphones lets you check your Cel-Fi GO G32 booster’s status and change its settings:
This is a complete kit, with everything you need to start getting the best signal.
A one-antenna Cel-Fi GO G32 system will cover most homes of typical size. Homes that are long and narrow, have more than two floors, or have specific problem areas can use two, three, or four inside antennas to distribute the signal coverage. Connect one length of coax cable to the outside antenna and one or more of the other lengths to the inside antenna; use the barrel connector to attach two lengths of cable together, if necessary, remembering to always use the shortest lengths of cable possible.
All kits include:
Using Nextivity’s IntelliBoost signal processing, the Cel-Fi GO G32 receives the outside cell signal, amplifies it, and rebroadcasts it inside your home through a wall-mounted panel antenna. This allows you to stay connected in areas where cell service is poor or where building materials interfere with signals from the local cell tower.
This Cel-Fi GO G32 Rural Grid Parabolic cell signal booster system works with Verizon 5G/4G LTE cellular bands and AT&T, T‑Mobile, UScellular, and GCI Alaska 5G/4G LTE/3G cellular bands. It does not work with other cellular networks, and it does not boost Verizon 3G.
The Cel-Fi GO G32 operates on two cellular bands simultaneously from a single carrier. It amplifies only one carrier at a time.
Not sure which bands your phone uses? Contact us—our technical support reps will be happy to help you!
The Top Signal EDGE panel antenna has four installation configurations:
The back of the panel includes a channel for the pigtail cable so it will mount flush against walls and ceilings.
Command™ brand is a trademark of 3M.
The coverage area this system can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to ww.P65Warnings.ca.gov.
For warranty information on this product, please see our Cel-Fi warranty information page.
Questions & Answers