Powerful Signal has created a cost effective 4G LTE/AWS Desktop Kit that can be used in a home or office.  This is a complete kit that contains all components to effectively bring 4G signal into your building.  It is important to note that 4G service must be available and have signal in your area.  This 4G Booster Kit will amplify and bring 4G signal into your building helping to eliminate the concrete, steel, stone and other barriers that block the signal.  Broadcast distance from the interior desktop antenna varies depending upon outside signal strength and internal building obstacles.  Contact Powerful Signal for additional information on how this system will work in your environment.

 

The purpose of this 4G/AWS Desktop system is for those who have a simple 1 or two room environment.  This system requires a coax to be run from the amplifier to the rooftop antenna.  The small desktop antenna is located near the amplifier.  The rooftop antenna requires installation.  The desktop antenna can be placed on a desk or shelf within a few feet of the amplifier.

 

Note:  Usable outside 4G signal (1-2 bars) is required in your area from your carrier.  The objective is to bring usable 4G LTE signal into your building for 4G devices.

 

 View Wilson 801865 Installation Guide

 

 

For Verizon: Wilson 801865 4G LTE Amplifier Option The Wilson 801865 is a 70dB gain (65dB typical, 70dB max) amplifier for use with Verizon LTE.  It has oscillation detection and adjustable gain control to assist in setting up the exterior and interior antennas.  The amplifier has 31dB of adjustability.	Wilson 801865	Wilson 801865
For Verizon: Cellphone-Mate CM700V 4G LTE Amplifier Option The Cellphone-Mate SureCall CM700V is a 70dB gain (70dB typical) amplifier for use with Verizon LTE.  It has oscillation detection and 31dB of adjustable gain control for both uplink and downlink.	Cellphone-Mate CM700V	Cellphone-Mate CM700V
For AT&T Cellphone-Mate CM700A 4G LTE Amplifier Option The Cellphone-Mate SureCall CM700A is a 70dB gain (70dB typical) amplifier for use with AT&T LTE. It has oscillation detection and 31dB of adjustable gain control for both uplink and downlink.	Cellphone-Mate CM700A	Cellphone-Mate CM700A
For T-Mobile, MetroPCS, Wind Mobile, Mobilicity Wilson 802365 4G AWS Amplifier Option The Wilson 802365 is a 70dB gain (65dB typical, 70dB max) amplifier for use with Verizon LTE. It has oscillation detection and adjustable gain control to assist in setting up the exterior and interior antennas. The amplifier has 31dB of adjustability.	Wilson 802365	Wilson 802365
For T-Mobile, MetroPCS, Wind Mobile, Mobilicity Cellphone-Mate CM2100-62 The Cellphone-Mate SureCall CM2100-62 is a 62dB gain (62dB typical) amplifier for use with AWS Carriers such as T-Mobile, MetroPCS, Wind Mobile, and Mobilicity.  This unit has 31dB of uplink and downlink adjustability.	Cellphone-Mate CM2100-62
Exterior Antenna  The Top Signal TS210371 exterior antenna handles all 4G LTE and AWS frequencies.  It can easily be mounted to a 2" pole, the included J-Pipe, or onto a wall.  This is an omni-directional antenna that has a 360° radiation pattern so it can collect and broadcast signal in all diretions.   This is an excellent antenna for metropolitain or suburban conditions.  If you are in a more remote location and have good line-of-sight to your 4G tower, Powerful Signal will be glad to substitute a directional antenna.  Contact us for more information.   Mounting hardware is included for up to a 2" pole.  Mounting is required.	4G LTE Omni Antenna	Antenna and Mounts
Desktop Antenna The Wilson 301208 desktop antenna is used for the broadcast antenna.  This antenna has about 5' of coax connected to it that connects to the amplifier.  This antenna has directional qualities with about a 100° radiation pattern so signal can be directed in a specific direction.	Desktop Antenna	Antenna shown on desk
240 Coax This kit comes with three (3) lengths of 240 coax which is small and easy to work with.  One 20' length that connects to the exterior antenna and two additional extensions, one 10' and the other 20'.  This allows you to mix and match the 3 lengths to give you from 20' to 50' of coax to run from the amplifier to the exterior antenna.	20' 240 with N & FME Connector	10' and 20' extension with FME connectors
Connectors Two 971113 N-Male to FME-Male connectors are provided to connect the 240 coax to the amplifier.