Call for Pricing
The CEL-FI QUATRA EVO Active DAS Hybrid cell signal booster is a two-carrier solution that provides up to 100 dB of signal gain for each carrier network. The QUATRA EVO improves cellular reception inside offices, warehouses, industrial facilities, campuses, custom homes, and other buildings that have weak or no cell signal available indoors.
Unlike passive DAS systems that use thick coax cables, the CEL-FI QUATRA EVO is a digital system that uses Cat 6 or Cat 5e Ethernet cable between the Network Unit (NU) and one to six Coverage Units (CUs). The CUs use Power over Ethernet (PoE) from the NU; no AC outlet is needed at end points where the CUs are mounted.
Powerful Signal specializes in bringing strong cellular voice and data into large commercial, industrial, and government buildings and luxury homes. We can fix specific problem areas or provide cellular coverage throughout your entire building.
This diagram shows the most extensive layout possible for a CEL-FI QUATRA EVO system. A QUATRA EVO system in a small business or large home would involve fewer components. (Click to enlarge.)
The QUATRA EVO is highly scalable: One NU can support up to six CUs. Powerful Signal can easily install additional NUs and CUs in your building as your business grows.
A QUATRA EVO Network Unit can transmit amplified cell signal and Power over Ethernet (PoE) up to 325 feet (100 meters) to the Coverage Unit(s). That distance can be doubled to 650 feet (200 meters) with a pair of CEL-FI QUATRA Fiber Range Extenders (QFRE) connected by a fiber optic cable. Distances between the NU and CUs can be further extended to up to 1.24 miles (2 kilometers) With a QUATRA EVO fiber hub. These options make the CEL-FI QUATRA EVO an excellent solution for campuses and large, long, and tall buildings.
New system setup (commissioning)
The WAVE Portal streamlines the commissioning process for new CEL-FI QUATRA systems. Once the new system is installed, powered on, and connected to the Internet, the Portal will automatically detect it and will bring the system online and relaying. Locate the QUATRA under ‘New Systems’ and follow the guided steps to commission the system.
In an office, warehouse, retail location, or custom home, you’ll get the best results and performance from a CEL-FI QUATRA EVO with Powerful Signal’s custom ProWay design and professional installation.
Working with your floor plans, our design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly. We also offer a managed installation in which we support your I.T. professionals with system design documents and technical support.
Call Powerful Signal at 435-634-6800 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
The Nextivity QUATRA EVO operates on Verizon, AT&T, and T-Mobile networks (including MVNOs that operate on those networks). You can amplify signal from one network or two networks simultaneously.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
For warranty information on this product, please see our Nextivity warranty information page.
Questions & Answers