WilsonPro 710i Band 71 Cellular Booster System with 1 Dome Antenna | Top Signal Series | 460064-PS1

WilsonPro 710i Band 71 Cellular Booster System with 1 Dome Antenna | Top Signal Series

Coverage for T‑Mobile 5G band 71
Bulk Pricing:
Buy in bulk and save
  • High-gain industrial booster for large homes and businesses of all sizes
  • Amplifies T‑Mobile 5G band 71 (600 MHz) only
  • Includes flex-mount EDGE dome antenna & rooftop antenna mount
  • Fully automatic with LCD touchscreen controls
  • Boosts voice & data
  • 50-ohm system with N connectors & low-loss 400 coax cable
  • Industrial booster; requires carrier approval to operate.
Outside Signal Strength
Coverage @ 700 MHz LTE
5 Bars
Up to 50,000 ft²
3 Bars
Up to 30,000 ft²
1 Bar
Up to 10,000 ft²

Call for Pricing

Free lifetime support
SKU: 460064-PS1
Call for Pricing

Product Description

This WilsonPro 710i system amplifies only T-Mobile band 71 (600 MHz). For wideband coverage with support for multiple carriers, see the WilsonPro Enterprise 1300 commercial cell signal booster.

Features of the WilsonPro 710i cell signal booster

  • Amplifies T-Mobile 600 MHz band 71. (Learn more about band 71.)
  • Provides coverage for offices, hospitals, campuses, warehouses, and other commercial and public facilities, as well as large and custom homes.
  • This is a high-gain booster with up to 90 dB of gain and 24–25 dBm of uplink and downlink power. Even with weak outside signal, it can provide band 71 coverage for a large indoor area. (Learn more.)
  • Built-in XDR (eXtended Dynamic Range) technology prevents overload and shutdown, no matter how strong the outside signal.
  • Color LCD touch screen displays the status and gain and allows you adjust the amplifier’s settings.
  • Wall-mounted with antenna ports on the top, with a compact size (9″ ᴡ × 10″ ʜ × 2″ ᴅ) that easily fits in your I.T. closet or other convenient, out-of-the-way room.
  • Outside directional antenna points in the direction of the T-Mobile cell tower. (Learn more).
  • Inside EDGE dome antenna mounts to drop ceilings, ceiling panels, and hard-deck ceilings. (Learn more.)
  • This is an industrial booster. Carrier approval must be obtained to operate the WilsonPro 710i. (Learn more.)

The WilsonPro 710i cell signal booster is the only band 71-specific commercial-grade cellular amplifier available for less than $1,500. It boosts T-Mobile’s 600 MHz cellular service used in rural and remote areas. The Pro 710i is wall-mounted and can cover up to 50,000 square feet with one inside broadcast antenna (with sufficient outside signal strength).

The WilsonPro 710i’s onboard software continuously monitors and adjusts the amplifier’s gain level, as needed. With Wilson’s patented XDR (eXtended Dynamic Range) technology, the Pro 710i will never overpower or shut down due to overly strong outside signal.

Who is the WilsonPro 710i for?

  • T-Mobile customers or businesses that need indoor T-Mobile band 71 service.
  • Office buildings, medical/business/education/government campuses, warehouses/distribution centers, and other multi-floor and/or large buildings.
  • Large and custom homes.
  • Buildings made from materials that block outside cell signal (steel, low-e glass, concrete, plaster, etc.).
  • Buildings with floor space below ground level, and other places where cell reception is poor.
  • Buildings in rural and remote locations, where outside cellular signal is weak.
  • Those who have heavy cellular user and data loads.
  • Those who frequently experience dropped calls, undelivered texts, or slow data rates.

The WilsonPro 710i requires carrier approval

Under the framework developed by the Federal Communications Commission (FCC), the WilsonPro 710i is classified as an industrial signal boosterexternal link icon. You will need approval from T-Mobile (or your band 71 carrier, if it is someone other than T-Mobile) before installing the WilsonPro 710i and commissioning it on the network.

To obtain permission from T-Mobile, download their rebroadcast agreement (Microsoft Word .docx), complete it, and email it to We recommend including a simple system design sketch with your application, showing the location of the antennas, cables, and booster in your building. It may take several weeks for T-Mobile to approve your application.

If you need help completing the rebroadcast agreement, please don’t hesitate to contact us.

Using the WilsonPro 710i in homes and small businesses

The WilsonPro 710i is a high-gain, high-powered booster designed for large indoor commercial spaces. Even with Wilson Electronics’s built-in XDR (eXtended Dynamic Range) technology, using the Pro 710i in a large home or small business increases the chances that the signal patterns from the inside and outside antennas will overlap each other and cause signal oscillation or booster shutdown.

To mitigate that potential issue, Powerful Signal’s WilsonPro 710i kit includes two attenuators. Attenuators reduce the signal the booster sends and receives from one of its antennas, reducing or eliminating signal oscillation. If you experience signal oscillation, one of our technical support specialists may recommend that you attenuate the signal the Pro 710i booster sends to and from the inside dome antenna by 10 dB, 20 dB, or 30 dB.

Optional plenum air coax cable upgrade

The WilsonPro 710i commercial cell signal booster system includes 400-type coax cable that connects the amplifier to the inside broadcast antenna. If your building requires fire-rated cable in plenum spacesexternal link icon, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.

Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, providing stronger signal from your WilsonPro 710i and a wider indoor coverage area.

(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)

400-type coax cable and plenum air coax cable terminated with N-male connectors This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.

Best practices: a custom-designed WilsonPro 710i solution

In a large building, office, or warehouse, you’ll get the best results and performance from the WilsonPro 710i with a custom design and professional installation.

Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.

Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.

Call Powerful Signal at 435-634-6800 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!

Office floor with a cellular booster system and dome antenna An office floor with amplified cellular signal from a WilsonPro 710i amplifier and one dome antenna.

Purchasing a WilsonPro 710i system

The WilsonPro 710i can be self-installed if you are familiar with cellular amplification equipment. We’ll be happy to advise you on the best placement of antennas or provide a custom, turnkey solution. If you purchase this system as a standalone product, it includes the following components:

WilsonPro 710i 50 Ohm 460064 icon WilsonPro 710i 50‑ohm cell signal amplifier 460064
WilsonPro 710i power cable icon Locking AC power supply 850023
Wilson Electronics LPDA building antenna 314411 icon Top Signal wideband outdoor directional antenna TS220971
Top Signal EDGE Dual-Mount Dome Antenna N-Female TS250620 icon Top Signal EDGE indoor dome antenna TS250620
Top Signal 400 coax 75 ft. N-Male Connectors TS340075 icon 75′ Top Signal TS‑400 coax with N‑male connectors TS340075
Top Signal 400 coax 50 ft. N-Male Connectors TS340050 icon 50′ Top Signal TS‑400 coax with N‑male connectors TS340050
Top Signal TS471010 -10 dB Attenuator 50 Ohm N-Male/N-Female icon Top Signal −10 dB attenuator TS471010
Top Signal TS471020 -20 dB Attenuator 50 Ohm N-Male/N-Female icon Top Signal −20 dB attenuator TS471020
Top Signal 50-ohm lightning surge protector TS450001 icon Top Signal 50‑ohm lightning surge protector TS450001
Top Signal adjustable rooftop antenna mount TS430001 icon Adjustable rooftop antenna mount TS430001
WilsonPro 710i installation guide 460064 icon WilsonPro 710i installation guide

How the WilsonPro 710i works

The WilsonPro 710i receives available outside cell signal, amplifies it, and rebroadcasts it inside your building. This allows you to stay connected in areas where cell service is poor or where your building’s construction materials interfere with signals from local cell towers.

How much area will the WilsonPro 710i cover?

This system comes with one dome antenna that broadcasts improved cellular signal in a spherical pattern. The radius of that circle depends on many factors, including:

  • Outside cell signal strength received by the donor antenna.
  • Inside building materials. (Cellular frequencies pass through wood framing and drywall more easily than through steel and concrete.)
  • Cellular frequencies used by the carrier. (Lower-frequency LTE and 800 MHz signals travel farther than higher-frequency AWS and PCS signals.)

In general, the stronger the outside cell signal, the greater the interior broadcast distance.

Powerful Signal has has been designing and installing cellular amplification systems since 2007. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.

FCC notice

For information on federal rules governing the use of industrial cell signal boosters, please see our FCC notice page.

Prop 65 notice

Caution triangle icon Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to link icon.

Product Specifications

Small & medium-sized offices
Strong outside signal (−95 dBm RSRP, 5 bars):
Up to 50,000 ft² indoor coverage @ 700 MHz
Fair outside signal (−105 dBm RSRP, 3 bars):
Up to 30,000 ft² indoor coverage @ 700 MHz
Weak outside signal (−115 dBm RSRP, 1 bar):
Up to 10,000 ft² indoor coverage @ 700 MHz
Outside Antenna:
Directional LPDA
Inside Antenna:
Omnidirectional dome
Cable Type:
Connector Type:
50 Ω
+90 dB max
Max Output Power (Uplink):
24.2 dBm
Max Output Power (Downlink):
24.5 dBm
Booster Case Material:
Signal Readout:
LCD display with output signal in dBm
Call for Pricing

Warranty Information

For warranty information on this product, please see our WilsonPro warranty information page.

Questions & Answers