The WilsonPro Enterprise 4330 is a channelized four-amplifier system designed for large commercial and government buildings, with indoor coverage of up to 100,000 square feet (depending on outside signal strength).
The WilsonPro Enterprise 4330 automatically controls the amplifier with its onboard software and adjusts the gain level, up or down, as needed. It will reduce its gain to prevent oscillation, and with Wilson’s XDR (eXtended Dynamic Range) technology, the Enterprise 4330 will never overpower or shut down.
This installers’ kit includes commercial-grade components, including 3 outside directional antennas, 4 inside dual-mount dome antennas, 1000 feet of TS-400 coax cable, N-male EZ-crimp connectors, and a cable prep tool and crimping tool.
Professional integrators, installers, and I.T. managers for:
“Part 20” consumer cellular boosters can amplify bands 12, 13, 5, 4, and 25 (which includes band 2).
Each band of frequency is divided into smaller units called blocks or channels. Cellular carriers license specific channels from the FCC, allowing multiple carriers in the same geographic area to use the same band of frequency without interference.
For example, PCS band 25 is divided into blocks A through G. Each block has an uplink frequency for phones to send data to the cell tower and a corresponding downlink frequency for towers to send data to phones; this allows phones to both send data and receive data at the same time.
Most cell phone signal boosters are wideband amplifiers that simultaneously amplify all bands and channels of cellular frequency. They work well under most conditions.
In dense, urban areas, however, outside signal from multiple competing carriers can be “noisy” and low-quality; in that circumstance, the WilsonPro Enterprise 4330 can selectively amplify only the specific carriers and channels that your building needs, improving the quality of the signal that the booster amplifies indoors.
Another common issue is the near–far problem: You want to amplify a specific band of signal from Carrier A, but Carrier B has a tower closer to your building that’s using the same band. A wideband amplifier will reduce its gain on that band to compensate for Carrier B’s overwhelming signal, but Carrier A’s weaker signal needs more gain. The WilsonPro Enterprise 4330 can disable the channel Carrier B is using and provide full gain for Carrier A’s channel on the same band.
The WilsonPro Enterprise 4330 cell phone signal booster sends and receives signal to and from cell towers in the local area. Because those towers are often in different directions, Powerful Signal’s Enterprise 4330 kit offers two options for setting up the outside donor antennas:
Split Mode takes advantage of Wilson’s Multi-Tower Targeting Technology™. Three individual coax cables are run from the amplifier to the roof, where they connect to three directional antennas that are pointed at specific cell towers: one for 700 MHz (bands 12/17 and 13), one for 800 MHz (band 5), and one for 1700–2200 MHz (bands 2 and 4). With three individually targeted directional antennas, the amplifier will receive more signal because of the higher gain directional antennas provide.
Common Mode uses a single run of coax cable from the amplifier to the roof, where it connects to one high-gain omnidirectional antenna that sends and receives signal to and from all cell towers in a 360° radius. This setup receives all cellular bands of frequency from all carriers in all directions. Unlike Split Mode, Common Mode allows for the reception of the same bands of frequency used by multiple carriers from separate towers. In exchange for easier installation and wider reception than Split Mode, in Common Mode antenna gain is lower, reducing the indoor coverage area the amplifier can provide.
The WilsonPro Enterprise 4330 comes with the WilsonPro Cloud service, which provides powerful remote administration tools for I.T. departments and system integrators, giving you high reliability with minimal system downtime.
With a WilsonPro Cloud subscription, you’ll receive customizable email and text alerts if the amplifier goes offline or experiences signal oscillation, weak signal, or no signal conditions.
With the WilsonPro Cloud you can remotely log on to the Enterprise 4330 through your phone, computer, tablet, or other device with a web browser. Once logged in, you can view the booster’s performance and signal levels and configure the system by turning cellular bands and channels on and off or rebooting the amplifier. The Cloud interface also includes a tool to help you tune the rooftop directional antenna.
If you administer multiple WilsonPro Enterprise boosters, the WilsonPro Cloud interface allows you to organize and monitor them by location and by customer account.
Remote monitoring is available through a wireless LTE connection using the outside donor antenna or through an Ethernet connection on the bottom of the Enterprise 4330 amplifier.
A one-year WilsonPro Cloud subscription with LTE service are included with the purchase of the Enterprise 4330 and is billed annually thereafter. For subscription pricing information, please call Powerful Signal at 435-634-6800 or contact us online.
WilsonPro Cloud dashboard
The WilsonPro Enterprise 4330 system includes 400-type coax cable to connect the amplifier to the four inside antennas. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the WilsonPro amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)
The WilsonPro Enterprise 4330 can be installed by cellular amplification integrators. We’ll be happy to advise you on the best placement of antennas or provide a custom, turnkey solution. This complete kit includes the following components:
Using Wilson Electronics’s patented technology, the WilsonPro Enterprise 4330 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office through four individual ports. This allows you to stay connected in areas where cell service is poor or where your office’s building materials interfere with signals from the local cell tower.
With an active subscription to the WilsonPro Cloud service, you can monitor and administer your WilsonPro Enterprise 4330 from any device with a web browser.
The WilsonPro Enterprise 4330 works with all major wireless carriers, including Verizon, AT&T, T-Mobile, DISH Wireless, UScellular, GCI Alaska, and most others.
It operates on common cellular frequencies.
This system comes with four dome antennas that broadcast improved cellular signal in a spherical pattern. The radius of those circles depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has has been designing and installing cellular amplification systems since 2007. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our WilsonPro warranty information page.
Questions & Answers