The Top Signal rural cell signal booster is a single-indoor-antenna system designed for medium-sized homes that need improved cell signal reception throughout the house. It combines the SolidRF Signal Plus 68 dB‑gain booster with low-loss 400-type coax cable and a high-gain wideband donor antenna. The high-gain LPDA (directional) antenna has an average of 2½ times the gain (+4 dB) of a standard LPDA antenna, while the high-gain omnidirectional antenna has 60 percent more gain (+2 dB) than a typical omni antenna.
The Top Signal Rural cell signal booster gives you strong signal for faster cellular data and fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in remote areas with weak cell service.
This system gives you the choice of a high-gain outdoor directional or omnidirectional antenna. Here are some general guidelines for selecting the right antenna.
If you’re still not certain which antenna will work best for you, please call us at 435-634-6800. Our technical support representatives will be happy to discuss your specific requirements and give you a recommendation based on years of professional experience.
You can install the Top Signal Rural cell signal booster yourself in a couple of hours. (See Documentation, below, to download the user manual and quick installation guide.)
Alternatively, you can have a professional install your booster system at additional cost. We recommend that you contact a local cable/satellite TV installer; the work required to install a cell signal booster is similar to installing a satellite dish TV service.
This is a complete kit, with everything you need to start getting the best signal in your home:
The booster receives available outside cell signal, amplifies it, and rebroadcasts it inside your home or home office. This allows you to stay connected in areas where cell service is poor or where your building’s construction materials interfere with signals from local cell towers.
The Top Signal Rural booster works with all major wireless carriers, including Verizon, AT&T, T-Mobile, UScellular, and most others.
It operates on common cellular frequencies.
The Top Signal EDGE panel antenna has four installation configurations:
The back of the panel includes a channel for the pigtail cable so it will mount flush against walls and ceilings.
Command™ brand is a trademark of 3M.
The coverage area this system can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance. With strong outside cell signal (−95 dBm RSRP), this system can typically cover 12,000 square feet of indoor space with 700 MHz signal. With weak outside signal−115 dBm RSRP), it can typically cover 1,500 square feet of indoor space.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For warranty information on this product, please see our SolidRF warranty information page.
Questions & Answers