The Rural SureCall Fusion4Home Max improves cellular reception in small homes and home offices The Fusion4Home Max’s innovative design includes an inline amplifier that increases the strength of the ambient outdoor signal before sending it down the coax cable to the main booster; this means the booster can provide better coverage, connectivity, and data performance for phones and other cellular devices.*
Enhancing that signal further, this rural system adds a high-gain wideband donor antenna. The high-gain LPDA directional antenna has an average of 2½ times the gain (+4 dB) of a standard LPDA antenna, while the high-gain omnidirectional antenna has nearly 60 percent more gain (+2 dB) than a typical omni antenna. Adding a high-gain antenna increases the range the Fusion4Home system can pick up cellular signal and send it to the booster.
* Compared to the regular SureCall Fusion4Home system (SC-PolyH-72-YP).
This system gives you the choice of a high-gain outdoor directional or omnidirectional antenna. Here are some general guidelines for selecting the right antenna.
If you’re still not certain which antenna will work best for you, please call us at 435-634-6800. Our technical support representatives will be happy to discuss your specific requirements and give you a recommendation based on years of professional experience.
You can install the Rural SureCall Fusion4Home Max cell signal booster system yourself in a couple of hours. (See Documentation, below, to download the user manual and quick installation guide.)
Alternatively, you can have a professional install your booster system at additional cost. We recommend that you contact a local cable/satellite TV installer; the work required to install a cell signal booster is similar to installing a satellite dish TV service.
The Fusion4Home Max system comes with the following components:
Using SureCall’s patented Extended Range Technology™, the Fusion4Home booster receives the outside cell signal, amplifies it, and rebroadcasts it inside your home through a wall-mounted panel antenna. An inline amplifier increases the signal strength between the outside high-gain antenna and the booster, compensating for signal loss and providing more signal for the booster to amplify. This allows you to stay connected in areas where cell service is poor or where your home’s construction materials interfere with signals from the local cell tower.
The Top Signal EDGE panel antenna has four installation configurations:
The back of the panel includes a channel for the pigtail cable so it will mount flush against walls and ceilings.
Command™ brand is a trademark of 3M.
This system comes with one inside panel antenna. With strong outside cell signal (−95 dBm RSRP or greater), it can cover up to 5,000 square feet of indoor building space with 700 MHz signal.
The size of the coverage area depends on many factors, including:
Substandard or inadequate conditions in any of these factors will reduce your coverage area.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 435-634-6800 or contact us online and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
For warranty information on this product, please see our SureCall warranty information page.
Questions & Answers