Product Description
Features of the weBoost Overland antenna & folding mount
- Omnidirectional antenna for overland vehicles, off-road trucks, and class B vans.
- Meets current MIL-STD-810H
and IP66
standards for endurance in tough outdoor conditions, including wind, rain, hail, dust, and dirt.
- Works with 698–2700 MHz 5G and 4G/LTE frequencies common to in-vehicle cell signal boosters. (Learn more about 5G compatibility.)
- Includes an optional 13″ mast extension.
- Side-exit adapter base, optional 3″ spring mount, and 16′ LMR195 coax cable. The narrow SMA-female connector threads through the mast, out the side-exit adapter, and into your vehicle.
- An SMA-male adapter attaches to signal boosters with SMA-female connectors. (Need an SMB or FME adapter?)
- Overland folding mount attaches to T-slots (including Rhino-Rack® systems), poles, or panels. The mounting bracket folds down for low-clearance areas or garage storage.
- Optional add-on: SeaSucker’s vacuum antenna mount allows you to attach the antenna wherever you need it, even if your vehicle doesn’t have a rail or roof rack system. You can easily remove the SeaSucker mount anytime and remount it when you’re ready to get on the road again.
- 2-year warranty.
The weBoost Drive Overland antenna & folding mount attaches to T-slots, poles, or panels and can be laid flat quickly and easily. (Click to enlarge)
Features and options
weBoost Drive Overland antenna & mount attached to a Rhino-Rack
Who is the weBoost Overland antenna & folding mount for?
- Off-road pickup trucks and SUVs, like the Chevy Colorado ZR2, Jeep Wrangler Rubicon, Dodge Ram Power Wagon, Ford Excursion, Toyota 4Runner, and more.
- Overlanding vehicles, like the EarthCruiser, EarthRoamer, Adventure Truck XT, Global X, Action Mobil, Unicat, Mercedes Zetros, Mercedes Unimog, Hunter RMV Predator, Avtoros Shaman, and more.
- Class B vans, like the Mercedes Sprinter, Ford Transit, Dodge Promaster, Revel 4×4, Storyteller Overland, Roadtrek, Sportsmobile, and more.
- Field service technicians (oil, gas, agriculture, etc.).
- Government agencies with vans and trucks that serve as mobile command posts (police, disaster recovery, etc.).
Optional Add-on: SeaSucker weBoost Mount heavy-duty vacuum antenna mount
The SeaSucker weBoost Mount solves the problem of how to mount the Overland antenna to a truck, RV, motorhome, trailer, or other vehicle that doesn’t have a rail or a rack. It’s also an excellent option when using your booster in a rental or other temporary vehicle.
The SeaSucker mount is pre-drilled to match the hole pattern on the base of the Overland mounting bracket. Place the SeaSucker’s vacuum pads against a clean, smooth, rigid surface (like metal, glass, or fiberglass) and pump each pad until the orange indicator band is no longer visible. The pads can be re-pumped as needed to maintain their seal. The mount removes quickly and easily by lifting one of the tabs on the vacuum pad.
SeaSucker mount with Drive Overland antenna & folding mount on a truck camper shell
Do-it-yourself installation
Installing the weBoost Overland antenna and mount is simple and fast. It does not require professional help; you can do it yourself in about 30 minutes.
See the Documentation section to download the installation guide.
Do you need an adapter?
The weBoost Overland antenna has 16 feet of LMR195 coax cable terminated with an SMA-female connector. The kit includes an SMA-male barrel adapter for connecting to cell signal boosters with SMA-female connectors.
If your cell signal booster has SMA-female connectors, you do not need to adapt this antenna; it will connect to your booster natively. Boosters with SMA connectors include the weBoost Drive Reach (models manufactured since spring 2022), the HiBoost Travel 4G 2.0 and Travel 3.0, the Nextivity CEL-FI GO G32 Mobile, and the weBoost Drive X and Drive 4G-X.
You will need to add an optional adapter (above) if you intend to use this antenna with any of the following boosters:
Choose the adapter add-on option at the top of this page before clicking Add to Cart.
This comparison will help you identify the connectors on your booster and its coax cables. (Click to enlarge.)
Product Specifications
Usage:
Overland vehicle / off-highway vehicle / pickup truck / Class B van
Connector Type:
SMA-female
Cable Type:
LMR195
Cable Length:
16 ft. (4.88 m)
Antenna Type:
Outside omnidirectional
Antenna Length:
10.5–26.5 in. (26.7–67.3 cm) [antenna + mast extension + side exit adapter ± spring mount]
Polarization:
Vertical
Mount Type:
Folding pole/t-slot mount
Mount Spec:
⅜-in. × 24 thread
Impedance:
50 Ω
Gain 698–806 MHz:
+2.4 dBi
Gain 806–960 MHz:
+2.6 dBi
Gain 1710–1990 MHz:
+3.8 dBi
Gain 1990–2170 MHz:
+3.7 dBi
Gain 2300–2700 MHz:
+4.3 dBi
Warranty Information
For warranty information on this product, please see our weBoost warranty information page.