Whether you’re at an RV resort, a remote national park, or mountain getaway, the Cel-Fi GO G32 RV system will help you stay connected, with faster 5G/4G data and fewer dropped calls, fewer undelivered texts, and fewer missed email messages.
The Cel-Fi GO G32 RV system gives you maximum flexibility for getting better cell signal in your rig. Place the inside panel antenna where you need signal most—the dining area, the driver’s console tray, the bedroom, even outside—and move it as needed. This system includes your choice of between 5 and 30 feet of flexible LMR195 coax cable that makes moving the antenna quick and simple.
With sufficient outside signal strength (at least −115 dBm RSRP or about 1 bar), the Cel-Fi GO G32 RV system can improve signal across half of your rig or more. Less outside signal will reduce the total coverage amount but you will still be able to call, text, and use cellular data closer to the inside antenna (as long as outside signal isn’t effectively zero).
A cell signal booster’s outside donor antenna receives signal from a cell tower and sends it to the booster to be amplified.
The Cel-Fi GO G32 Class A & Class C RV system includes a low-profile Poynting PUCK‑1 antenna with up to 6 dBi of gain. It has 6.6′ (2 m) of thin coax cable that you’ll bring inside the RV through an available opening or a specially-drilled small entry point.
The PUCK‑1 has six mounting options, including a 3M® adhesive pad, making it ideal for RVs without ladders and class A motor coaches that have low-clearance concerns. (Click here to download the Poynting PUCK‑1 PDF user guide with installation instructions.)
If your RV has a ladder or other mounting point and clearance isn’t a concern, the Cel-Fi GO G32 Class A & Class C RV system includes an optional upgrade to a Top Signal 5G OTR antenna (4.1 dBi max gain with 11.3′ RG58 coax cable), an RFI 26″ antenna (5.5 dBi max gain with 16.4′ RG58 coax cable), or an RFI 38″ quick-release antenna (6.5 dBi max gain with 16.4′ RG58 coax cable).
You can install the Cel-Fi GO G32 RV system yourself or you can have it installed by an RV dealer or service center.
For instructions and tips on setting up this system in your RV, motorhome, or trailer, download the PDF installation guide for the PUCK‑1 antenna system or for Top Signal 5G OTR antenna and RFI antenna systems.
The Cel-Fi WAVE app for smartphones lets you check your Cel-Fi GO G32 booster’s status and change its settings:
This is a complete kit, with everything you need to start getting the best signal in your RV:
The standard kit includes:
The Top Signal 5G OTR antenna kit includes:
The RFI 26″ antenna kit includes:
The RFI 38″antenna kit includes:
This Cel-Fi GO G32 Smart Signal Booster system works with Verizon 5G/4G LTE cellular bands and AT&T, T‑Mobile, UScellular, and GCI Alaska 5G/4G LTE/3G cellular bands. It does not work with other cellular networks, and it does not boost Verizon 3G.
The Cel-Fi GO G32 operates on two cellular bands simultaneously from a single carrier. It will support only one carrier at a time.
Not sure which bands your phone uses? Contact us—our technical support reps will be happy to help you!
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For warranty information on this product, please see our Cel-Fi warranty information page.
Questions & Answers