
Product Description
The Drive Reach RV system uses weBoost’s most powerful mobile booster to provide maximum flexibility for getting better cell signal in your RV, motorhome, fifth wheel, or trailer. Using Wilson Electronics’s OTR mast antenna and your choice of an inside desktop or panel antenna, you can put signal where you need it most—the dining area, the driver’s console tray, the bedroom, even outside—and move it as needed.
Stay connected longer with the strongest cell signal and experience fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in areas with weak cell service, obstructions, and long distances from cell phone towers.
The standard desktop tower that comes with the weBoost Drive Reach RV system has acceptable performance, with an average gain of 1.5 dBi—a 43 percent increase in the signal strength it receives from the Drive Reach booster.
Top Signal’s EDGE panel antenna has an average gain of 7.1 dBi—a 425 percent increase in the signal it receives from the booster. That’s an average of 3.7 times the gain of weBoost’s desktop antenna across all bands of cellular frequency.
The Top Signal EDGE panel antenna also has multiple installation options in your RV or towable: Mount it on a wall with the included bracket or with Command™ Strips (purchased separately), stand it upright on any flat surface, or mount it horizontally (downward-facing) with the bracket or Command Strips. The back of the panel includes a channel for the pigtail cable so it will mount flush against walls and ceilings.
Command™ brand is a trademark of 3M.
You can install the weBoost Drive Reach RV system yourself, or you can have it installed by an RV dealer or service center.
See the Documentation section to download the installation guide or check out the installation video:
If you want to use your weBoost Drive Reach with a 12‑volt power socket, we offer an optional 12V DC power supply.
We also offer an optional 12V DC hardwire power supply with an inline 3-amp fuse. The hardwire kit connects directly to your RV’s DC power system, freeing up an inside power outlet and allowing for a less-cluttered installation.
To get the DC socket power supply, DC hardwire power supply, or both, use the dropdown option at the top of this page before clicking Add to Cart.
The weBoost app measures signal performance, pinpoints the nearest cell tower, and shows your cell signal strength before and after installation. It includes step-by-step setup instructions and how-to videos for weBoost products.
This is a complete kit, with everything you need to start getting the best signal in your RV or towable:
Using Wilson Electronics’s patented technology, the Drive Reach RV system receives the outside cell signal, amplifies it, and rebroadcasts it to a desktop-sized area. This allows you to stay connected in areas where cell service is poor, while you’re underway or parked.
The weBoost Drive Reach RV system works with all major wireless carriers, including Verizon, AT&T, T-Mobile, DISH Wireless, UScellular, GCI Alaska, and most others.
It operates on common cellular frequencies.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
.
Product Specifications
Warranty Information
For warranty information on this product, please see our weBoost warranty information page.
Questions & Answers