weBoost Office 200 spec sheet (PDF)
weBoost Office 200 install guide (PDF)
Top Signal high‑gain omni antenna TS210681 spec sheet (PDF)
Top Signal EDGE dome antenna TS250620 spec sheet (PDF)
Top Signal TS‑400 coax TS340000 spec sheet (PDF)
Top Signal 
What’s my actual cell signal strength?
The weBoost Office 200 is Wilson Electronics’s professional-grade cell signal amplifier for small- to medium-sized commercial buildings up to 20,000 square feet.
The Office 200’s onboard software continuously monitors and adjusts the amplifier’s gain level, and its patented XDR (eXtended Dynamic Range) technology means the amplifier will never shut down due to oscillation between the inside and outside antennas. The color LCD touch screen allows installers and administrators to monitor the gain on each cellular band and disable specific bands, if needed.
This kit, available only from Powerful Signal, includes your choice of 1 to 4 Top Signal EDGE dome antenna that can be installed on drop or hard deck ceilings.
The weBoost Office 200’s touchscreen LCD color display provides greater control and usability.
weBoost refurbished cell signal booster systems were previously purchased and returned to the manufacturer. They may have been used briefly or not used at all.
The manufacturer has inspected and tested this cell signal booster to ensure that it’s in good working order. Any damaged or non-working components have been replaced with new, working ones. The booster may have cosmetic blemishes from a previous installation.
Refurbished weBoost systems sold by Powerful Signal have a 90-day return period from date of purchase and are backed by the manufacturer’s one-year warranty against defects in workmanship and/or materials.
The antennas, coax cables, and other components in this complete kit are new and unused.
The weBoost app measures signal performance, pinpoints the nearest cell tower, and shows your cell signal strength before and after installation. It includes step-by-step setup instructions and how-to videos for weBoost products.
The weBoost Office 200 can be self-installed if you are familiar with cellular amplification equipment. We’ll be happy to advise you on the best placement of antennas.
All systems include:
weBoost Office 200 refurbished 50‑ohm cell signal amplifier 470047R
12V/3A AC/DC wall outlet power supply w/locking plug 850026
Top Signal high‑gain outdoor omni antenna w/mounting hardware TS210681
Top Signal 50‑ohm lightning surge protector TS450001
Adjustable 18″ rooftop antenna mount TS430001
weBoost Office 200 install guide
1-antenna systems also include:
Top Signal EDGE dome antenna w/mounting post, nut & mounting plate TS250620
75′ Top Signal TS‑400 coax cable TS340075
50′ Top Signal TS‑400 coax cable TS340050
2-antenna systems also include:
Top Signal EDGE dome antenna w/mounting post, nut & mounting plate TS250620 (×2)
75′ Top Signal TS‑400 coax cable TS340075 (×2)
50′ Top Signal TS‑400 coax cable TS340050
Top Signal 2‑way N‑female 50‑ohm splitter TS412101
2′ Top Signal TS‑400 coax jumper cable TS340002
3-antenna systems also include:
Top Signal EDGE dome antenna w/mounting post, nut & mounting plate TS250620 (×3)
75′ Top Signal TS‑400 coax cable TS340075 (×3)
50′ Top Signal TS‑400 coax cable TS340050
Top Signal 3-way 50-ohm splitter TS413101
2′ Top Signal TS‑400 coax jumper cable TS340002
4-antenna systems also include:
Top Signal EDGE dome antenna w/mounting post, nut & mounting plate TS250620 (×4)
75′ Top Signal TS‑400 coax cable TS340075 (×4)
50′ Top Signal TS‑400 coax cable TS340050
Top Signal 4-way 50-ohm splitter TS414101
2′ Top Signal TS‑400 coax jumper cable TS340002
The weBoost Office 200 system includes a 400-type coax cable to connect the amplifier to the inside antenna. If your building requires fire-rated cable
in plenum spaces, please ask us about upgrading to ½‑inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the weBoost amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)
This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.
The nylon post and nut are used with drywall and drop ceilings; the mounting plate (blue) is used with hard deck ceilings. (Click to enlarge.)
The weBoost Office 200 receives available outside cell signal, amplifies it, and rebroadcasts it inside your building. This allows you to stay connected in areas where cell service is poor or where your building’s construction materials interfere with signals from local cell towers.
The weBoost Office 200 works with all major wireless carriers, including Verizon, AT&T, T-Mobile, DISH Wireless, UScellular, GCI Alaska, and most others.
It operates on common cellular frequencies.
The coverage area this system can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has has been designing and installing cellular amplification systems since 2007. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our weBoost warranty information page.
Questions & Answers
