See our weBoost Office 200 Top Signal Series kit, with high‑gain omni antenna and 4 EDGE dome antennas!
The weBoost Office 200 is Wilson Electronics’s professional-grade cell signal amplifier for small- to medium-sized commercial buildings up to 30,000 square feet.
The Office 200’s onboard software continuously monitors and adjusts the amplifier’s gain level, and its patented XDR (eXtended Dynamic Range) technology means the amplifier will never shut down due to oscillation between the inside and outside antennas. The color LCD touch screen allows installers and administrators to monitor the gain on each cellular band and disable specific bands, if needed.
This four-antenna solution includes four Wilson low-profile dome antennas that can be installed in drop ceilings.
In a building, office, or warehouse over 20,000 square feet, you’ll get the best results and performance from the weBoost Office 200 with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 435-634-6800 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
The weBoost app measures signal performance, pinpoints the nearest cell tower, and shows your cell signal strength before and after installation. It includes step-by-step setup instructions and how-to videos for weBoost products.
The weBoost Office 200 can be self-installed if you are familiar with cellular amplification equipment. We’ll be happy to advise you on the best placement of antennas or provide a custom, turnkey solution. If you purchase this system as a standalone product, it includes the following components:
The weBoost Office 200 system includes a 400-type coax cable to connect the amplifier to the inside antenna. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½‑inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the weBoost amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)
The weBoost Office 200 receives available outside cell signal, amplifies it, and rebroadcasts it inside your building. This allows you to stay connected in areas where cell service is poor or where your building’s construction materials interfere with signals from local cell towers.
The coverage area this system can provide depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has has been designing and installing cellular amplification systems since 2007. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
For warranty information on this product, please see our WilsonPro warranty information page.
Questions & Answers