The weBoost eqo cell phone signal booster (pronounced "echo") provides maximum power for the best possible cellular reception in a single room or office. Stay connected with the strongest cell signal, and experience fewer dropped calls, undelivered texts, and missed email messages. Keep your data moving faster in areas with weak cell service and in buildings that block outside cell signal.
You can install the weBoost eqo yourself in minutes, without climbing on your roof or pulling cables through walls. (See Documentation, below, to download the installation guide.)
The newly-redesigned eqo 4G now includes an optional outside antenna that you may place between an outside window and the window screen. An attached flat coax cable runs under the windowsill. If you prefer not to use the outside antenna, the booster unit itself can also communicate with the cell tower.
This is a complete kit, with everything you need to start getting the best signal in your home:
Using Wilson Electronics’ patented SmarTech III® technology, the eqo 4G receives the outside cell signal, amplifies it, and rebroadcasts it inside your room. This allows you to stay connected in areas where cell service is poor, or where your home or office’s building materials interfere with signals from the local cell tower.
The weBoost eqo 4G works with all major wireless carriers:
It operates on common 4G/3G cellular frequencies.
The eqo 4G is designed to amplify cellular transmissions inside a single small room or office.
This system comes with one panel antenna that will broadcast improved cellular signal in a 180° arc. The broadcast distance depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866‐912‐3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note: The four largest carriers (Verizon, AT&T, T‑Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are no fees to register your cell signal booster.
If you have any questions, please contact Powerful Signal.
weBoost signal boosters and kits are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. See reseller warranty procedures.
Signal boosters and kits may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a returned material authorization (RMA) number supplied by weBoost. weBoost shall, at its option, either repair or replace the product. weBoost will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.
This warranty does not apply to any signal boosters or kits determined by weBoost to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic properties.
Failure to use a surge-protected AC power strip with at least a 1000 Joule rating will void your warranty.
All weBoost products that are packaged with other weBoost accessory products are intended for resale and use as a single unit, and such product kits are required to be sold to the end user or subsequent reseller as packaged. The “de-kitting” and sale as a standalone product of any one or more components of such a product kit is in violation of weBoost’s warranty. No “de-kitted” product will be eligible for return for any reason.
The sale of separate, not-kitted cable, antennas, and other accessories is allowed and fully warranted.