Marine CEL-FI GO G32 Cell Signal Booster with 38-Inch High-Gain Antenna | Top Signal Series

Features of the Marine CEL-FI GO G32 38″ high‑gain antenna system

• Combines the most powerful consumer cell signal booster with a 38″ high-gain marine whip antenna for the best possible signal while underway and while moored.
• Boosts one carrier at a time for multiple users simultaneously. The CEL-FI GO G32 booster amplifies your choice of Verizon, AT&T, T‑Mobile, UScellular, or GCI Alaska 5G and 4G/LTE. Works only within the United States. (Learn more about 5G compatibility.)
• Unlike other mobile boosters, the CEL-FI GO G32 can be used while your vessel is moored or underway. The booster provides an industry-leading gain of up to 100 dB in stationary mode* and up to 65 dB in mobile mode; switch modes with the Nextivity WAVE app for smartphones.
• RFI’s 38″ fiberglass marine antenna includes 16.4′ (5.0 m) of RG58 coax cable and a 1″ × 14‑thread ferrule that attaches to standard marine mounts. This antenna also has a quick-release feature for easy, fast setup and takedown. Cable extensions using low-loss TS‑400 coax are also available at additional cost.
• Top Signal’s high-performance directional EDGE panel antenna mounts flush to walls; it also stands upright on any flat surface and can be moved about the boat. (Learn more.) Connect the antenna to the booster with 5, 10, 15, 20, or 30 feet of thin, flexible coax cable. Choose the cable length that’s best for your needs.
• Includes both 120-volt AC and 12-volt DC power supplies.*

* 100 dB stationary mode is available only when the CEL-FI GO G32 booster is powered by the 120V AC power supply.

The Marine CEL-FI GO G32 cell phone signal booster improves cellular reception for boats and vessels that are moored and are underway. Stay connected on lakes and rivers and in coastal waters. Experience faster 5G/4G data and fewer dropped calls, undelivered texts, and missed email messages.

The 38″ RFI Q-Fit® marine antenna provides 4.5 to 6.5 dBi of signal gain, sending stronger signal to the CEL-FI GO booster for better inside cellular coverage and a stronger connection to the cell tower.

The inside Top Signal EDGE panel antenna can be placed where you need signal most—the dining area, the helm, etc.—and moved as needed. You can also mount the EDGE panel antenna on a wall or ceiling with the mounting bracket (included) or with Command™ Strips or similar adhesives. Choose your preferred length of thin, flexible 195 coax cable to connect the panel antenna to the booster.

Command™ brand is a trademark of 3M.