This WilsonPro 1100 system works with 75‑ohm antennas and other components.
For the 50‑ohm version of this system, see the WilsonPro 1100 460147.
The WilsonPro 1100 is Wilson Electronics’ next-generation professional-grade cell signal amplifier for medium-sized and large buildings.
The Pro 1100 is a wall-mounted, single-amplifier system that can cover 25,000 to 35,000 square feet with one inside broadcast antenna (with sufficient outside signal strength). Its inside antenna port can also be split to support up to four broadcast antennas for improved cellular coverage in multiple areas of your building.
The WilsonPro 1100’s on-board software continuously monitors and and adjusts the amplfier’s gain level, as needed. With Wilson’s patented XDR (eXtended Dynamic Range) technology, the Pro 1100 will never overpower or shut down or experience oscillation between the inside and outside antennas.
The color LCD touch screen allow installers and administrators to monitor gain on each cellular band and disable specific bands, if needed.
In a large building, office, or warehouse, you’ll get the best results and performance from the WilsonPro 1100 with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 866-912-3444 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
Properly installing and configuring the WilsonPro 1100 is complex task, so we strongly advise a custom solution (see above). If you prefer to purchase this system as a standalone product, without design and installation, the kit comes with the following components:
The WilsonPro 1100 receives available outside cell signal, amplifies it, and rebroadcasts it inside your building. This allows you to stay connected in areas where cell service is poor or where your building’s construction materials interfere with signals from local cell towers.
The WilsonPro 1100 works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.
It operates on common 4G/3G cellular frequencies.
This system comes with one dome antenna that broadcasts improved cellular signal in a spherical pattern. The radius of that circle depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866‐912‐3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
Some online retailers claim that a one-antenna WilsonPro commercial system will provide 50,000 square feet of coverage. That figure is unrealistic under typical conditions, and Powerful Signal warns consumers against purchasing WilsonPro systems from retailers who make such exaggerated claims.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For warranty information on this product, please see our WilsonPro warranty information page.