SureCall Fusion2Go XR data sheet (PDF)
SureCall Fusion2Go XR quick setup guide (PDF)
SureCall Fusion2Go XR user guide (PDF)
Poynting 
Poynting 
Poynting 
What’s my actual cell signal strength?
The SureCall Fusion2Go XR cell phone signal booster provides excellent transmit power for better cellular reception on the road, with up to 58% more uplink power than its leading competitor.
The 3.9″-diameter omnidirectional Poynting PUCK-1 antenna can be permanently mounted to the roof of your vehicle with an adhesive pad or by a professional installer. It sends and receives signal between cell towers and the Fusion2Go XR booster so you can stay connected, experience fewer dropped calls and missed messages, and have more reliable access to navigation and entertainment apps on your smartphone.
The rugged, low-profile Poynting PUCK-1 outside donor antenna receives signal from cell towers and sends it to the SureCall Fusion2Go XR booster to be amplified. It provides up to 6 dBi of gain and has a thin, 6.6′ (2 m) coax cable that connects to the booster with a adapter.
The PUCK-1 has 6 mounting options, including a 3M® adhesive pad and 20 mm × 30 mm spigot that can be inserted into a hole cut into the roof of your car. (We recommend that you seek out a professional installer to do this job.)
The PUCK-1 antenna is available in your choice of black or white models.
Surface mount with 3M® adhesive pad
Magnet mount
Spigot mount with 30 mm or 70 mm spigot
Pipe mount horizontal or vertical (zip tie or hose clamp required)
Wall mount (additional screws required)
Panel mount (longer M4 bolts may be required)
When you need the strongest cell phone connection in your vehicle.
Installing the SureCall Fusion2Go XR Permanent Mount NMO Edition requires drilling a 0.8″ (20 mm) hole in the roof of your vehicle and running a thin cable under your vehicle’s headliner
to the booster. (See the sample installation diagram in this section.) We strongly recommend that you hire a professional car audio installer to do this job.
You can also use the antenna’s adhesive mount or magnet mount to do a non-permanent mount that runs the cable across the car’s roof and in through a doorway.
Typical installation of the SureCall Fusion2Go XR Permanent Mount NMO Edition booster kit (click to enlarge).
This is a complete kit, with everything you need to start getting the best signal in your vehicle:
SureCall Fusion2Go XR cell signal amplifier SC-Fusion2GoXR
SureCall 12V DC/DC power supply w/12′ cable
SureCall adhesive‑mount patch antenna w/11′ LEONI Dacar® 302 coax cable
Vent clip magnet-mount + adhesive metal plate for smartphones
Booster mounting kit
SureCall Fusion2Go XR user manual
SureCall Fusion2Go XR quick setup guide
SureCall magnet-mount outside antenna w/13′ 100-type coax cable
3M adhesive outside antenna mount (for aluminum-body trucks)
FME‑female to SMA‑female connector TS451036
Optional add‑on
Choice of…
…or
M4 screws (×4)
Magnetic base plate
3M® foam adhesive pad
20 mm × 70 mm spigot
20 mm × 30 mm spigot
Spigot nut
Pole/wall bracket
Poynting PUCK-1 user guide
The SureCall Fusion2Go XR works with all major wireless carriers, including Verizon, AT&T, T-Mobile, DISH Wireless, UScellular, GCI Alaska, and most others.
It operates on common cellular frequencies.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our SureCall warranty information page.
Questions & Answers
