LTE 38‑Inch Vehicle Antenna RFI Quick‑Release Whip 6.5 dBi 698–2700 MHz | TS210701 | CDQ7195-B

LTE 38-Inch Vehicle Antenna RFI Quick-Release Whip 6.5 dBi 698–2700 MHz TS210701

High gain & fast take-down!
Bulk Pricing:
Buy in bulk and save
  • High-gain (4.5–6.5 dBi) antenna for RVs, OTR trucks, service vehicles & pickup trucks
  • Quick-release threaded spring mount—take down & set up in moments
  • Mounts to a 1/2–5/8″ (13–16 mm) hole
  • 16.4′ (5.0 m) RG58 coax cable with SMA‑male connector, attached
  • 4 optional add-on antenna mounts (rail, magnet, fold-down & pole)

Free lifetime support
SKU: TS210701 
Calculated at Checkout

Product Description

Features of the RFI quick‑release whip antenna

  • 4.5–6.5 dBi nominal gain.
  • 38.2″ (90.7 cm) tall × 1.22″ (3.1 cm) wide at the base.
  • Black fiberglass radome.
  • RFI’s patented Meander™ radiating elements deliver extraordinary consistency in gain, coverage pattern, and bandwidth.
  • Works with 698–2700 MHz 5G and 4G/LTE frequencies. (Learn more about 5G compatibility.)
  • RFI’s Q‑Fit® threaded quick-release connector provides fast, easy takedown and setup. The whip antenna attaches and detaches in seconds.
  • The included spring mount has a threaded base (0.5″‑30 × 0.6″) and jam nut that mounts to a 0.5″–0.625″ (13–16 mm) hole.
  • Includes four optional mounts for your vehicle. (See photo gallery, below.)
  • 16.4′ (5.0 m) of RG58 cable is attached to the spring mount, terminating in an SMA‑male connector. (Do you need to adapt to FME‑female, SMB‑female, or N‑male?)
  • 1‑year warranty.
LTE Vehicle Antenna RFI Quick-Release 38-Inch Whip 6.5 dBi 698–2700 MHz TS210701 quick-release connector RFI’s whip antenna includes a threaded quick-release that allows you to remove and reattach the antenna in seconds. Get on the road and set up your parking spot quickly and easily! (Click to enlarge.)

How the RFI quick‑release whip antenna works

  • Receives outside signal from a cell phone tower and directs it to a cell phone signal booster.
  • For use with commercial OTR trucks, RVs, motorhomes, fifth wheels, trailers, service vehicles, and pickup trucks. (May also be adapted for use with buildings.)
  • Works with cell signal boosters with SMA‑female connectors; easily adapted to boosters with FME, SMB, or N connectors.
What are the differences between the Wilson Drive OTR antenna and RFI Q-Fit whip antenna? What are the differences between this antenna and the Wilson Drive OTR antenna? Click here to find out!

Do you need an adapter?

This RFI cellular antenna has 16.4 feet of RG58 coax cable terminated with an SMA-male connector.

If your cell signal booster has SMA-female connectors, you do not need to adapt this antenna; it will connect to your booster natively. Boosters with SMA connectors include the CEL-FI GO G32 Mobile, the weBoost Drive Reach (manufactured or later), the weBoost Drive X and Drive 4G-X, the HiBoost Travel 3.0 and Travel 4G 2.0, and the Uniden UM50 FN.

You will need to add an optional adapter (above) if you plan to use this antenna with any of the following boosters:

Choose the adapter add-on option at the top of this page before clicking Add to Cart.

FME-male FME-female SMA-male SMA-female SMB-male SMB-female N-male N-female connectors This comparison will help you identify the connectors on your booster and its coax cables. (Click to enlarge.)

RFI quick‑release whip antenna contents

LTE Vehicle Antenna RFI Quick-Release 38-Inch Whip 6.5 dBi 698–2700 MHz TS210701 fiberglass whip antenna icon RFI 38″ black fiberglass whip antenna
RFI Q-Fit Quick-Release spring mount with RG58 coax cable icon Spring mount w/16.4′ black RG58 coax cable & SMA‑male connector
Top Signal 3-way rail mount TS432120 icon Optional add‑on
Top Signal 3-way antenna rail mount w/hardware TS432120
Top Signal MagMAX 3X OTR Trucker Magnetic Antenna Mount TS432011 icon Optional add‑on
Top Signal MagMAX 3X antenna mount TS432011
Rhino-Rack Folding Aerial Bracket 43196 icon Optional add‑on
Rhino-Rack folding aerial bracket 43196 w/3‑way rail mount & hardware TS432111
RFI Folding Bull Bar Mount for OTR Antennas TS432702 icon Optional add‑on
RFI bull bar antenna mount w/hardware TS432702 & stainless steel 3‑way mount TS432111

Please note

  • This antenna will not operate by itself; it is one component of a cell signal booster system. Please contact Powerful Signal—we’ll be happy to help you determine what your needs are and what system will work best in your situation.

Product Specifications

RV/commercial truck/service vehicle/pickup truck
Antenna Type:
Omnidirectional whip
Antenna Length:
38.2 in. (97.0 cm)
Connector Type:
Mount Type:
Spring mount w/threaded quick-release base
Mount Spec:
0.5 in. (12.7 mm) thread
Cable Type:
Cable Length:
16.4 ft. (5.0 m)
50 Ω
Gain 698–960 MHz:
+6.5 dBi
Gain 1710–2170 MHz:
+4.5 dBi
Gain 2300–2700 MHz:
+5.5 dBi
Beamwidth Horizontal Plane:
Beamwidth Vertical Plane:

Warranty Information

RFI products have a 1-year manufacturer’s warranty that covers defects in materials and workmanship; see RFI Americas full warranty statement (PDF). This antenna is also covered by Top Signal’s 90-day warranty.

Questions & Answers