RFI Black Spring Mount for RFI Q-Fit Omni Whip Vehicle Antennas w/16.4 ft. RG58 SMA-Male

RFI Black Spring Mount for Q-Fit Antennas 16.4′ RG58 SMA-Male TS432711

In stock—fast shipping!

Current Stock:

Quantity:

Product Description

Replacement or additional spring mount for RFI Q-Fit® antennas. Antenna not included.
Works with RFI’s 38″ Q-Fit® vehicle antenna (TS210721) and 38″ Q-Fit® marine antenna (TS210702). Mount for vehicle use only; not suited for marine applications.
RFI’s Q-Fit® threaded quick-release connector provides fast, easy takedown and setup. The whip antenna attaches and detaches in seconds.
The included spring mount has a threaded base (0.5″-30 × 0.6″) and jam nut that mounts to a 1⁄2″–5⁄8″ (13–16 mm) hole.
Includes four optional mounts for your vehicle. (See photo gallery, below.)
16.4′ (5.0 m) of RG58 cable is attached to the spring mount, terminating in an SMA-male connector. (Do you need to adapt to FME-female, SMB-female, or N-male?)
1-year warranty.

Q-Fit® is a registered trademark of RFI Technology Solutions.

RFI’s Q-Fit® antennas include a threaded quick-release that allows you to remove and reattach the antenna in seconds. (Click to enlarge.)

The RFI spring mount requires a sturdy mount with a 0.5–0.625″ (13–16 mm) hole. If you need a mount, we offer four add-on mounting options:

The 3-way rail mount secures to rails and brackets.
The MagMAX 3X magnet mount firmly attaches to steel roofs.
The Rhino-Rack folding aerial bracket attaches to rails, ladders, and Rhino-Rack systems. It folds 180° into 7 positions.
The fold-down “bull bar” mount attaches to rails and ladder. It folds 90° into 4 positions.

Top Signal 3-way rail mount

This RFI antenna mount has 16.4 feet of RG58 coax cable terminated with an SMA-male connector.

If your cell signal booster has SMA-female connectors, you do not need to adapt this antenna; it will connect to your booster natively. Boosters with SMA connectors include the CEL-FI GO G32 Mobile, the weBoost Drive Reach (manufactured 2022 or later), the weBoost Drive X and Drive 4G-X, the HiBoost Travel 3.0 and Travel 4G 2.0, and the Uniden UM50 FN.

You will need to add an optional adapter (above) if you intend to use this antenna with any of the following boosters:

Select an FME-female connector if you have a vehicle booster like the SureCall Fusion2Go XR or Fusion2Go 3.0.
Select an SMB-female connector if you have the weBoost Drive Reach vehicle booster (manufactured 2021 or earlier).
Select an N-male connector if you have a 50-ohm building booster like the weBoost Office 100 or Office 200, the SureCall Fusion5X or Fusion5s, or a HiBoost Home or Pro series booster.