Marine Peplink MAX BR1 Pro 5G Cellular–WiFi Router with Poynting 4x4 MIMO Antenna

Features of the Marine Peplink MAX BR1 Pro 5G with 4×4 MIMO Omni Antenna

• The Peplink MAX BR1 Pro 5G converts 4G/LTE and 5G cellular signal to WiFi, creating a large WiFi “hotspot” on your boat, yacht, houseboat, or ship that can be used by laptops, tablets, smart TVs, and other WiFi-enabled devices.
• The router’s two Ethernet LAN ports and one Ethernet WAN port support gigabit Ethernet (10/100/1000 Mbps). LAN port 1 has Power over Ethernet (PoE) capability.
• The dual SIM card slot supports one or two cellular data plans and requires a SIM card. The router also supports WiFi 6, WiFi WAN, and Ethernet WAN. Onboard software allows you to prioritize which data source the router will prefer and which one(s) it will fail over to.
• The Poynting OMNI-414 cellular marine 4×4 MIMO antenna sends signal to and from cell towers with up to 3.5 dBi of gain and superior signal strength and quality. (Learn more.) The OMNI-414 has four 6.6′ HDF195 coax cables in two pairs; you can add optional 5′, 10′, 15′, 20′, or 30′ 195 coax extension cables if you need longer runs from the antenna to the router.*
• The Poynting PUCK-12 2×2 MIMO WiFi antenna broadcasts simultaneous dual-band 2.4 GHz & 5 GHz WiFi with up to 7.5 dBi of gain. (Learn more.) It has two 6.6′ HDF195 coax cables that connect to the router.
• The router includes a GPS port and receiver antenna with a 15′ cable. Onboard software stores up to seven days of GPS location data.
• GPIO power port with 120V AC/DC adapter.
• The router’s compact metal enclosure (4.95″ × 4.2″ × 1.4″) is easy to install in tight spaces.
• This solution operates on a wider range of cellular bands than consumer cell signal boosters. (See below.)
• Certified by Verizon, AT&T, and T-Mobile. Works with all major U.S. cellular carriers and networks.
• Includes Peplink’s one-year warranty plus a one-year subscription to Peplink PrimeCare+ service.
• With a PrimeCare+ add-on package, you can extend your router’s warranty, continue to use Peplink’s InControl² cloud-based management and SpeedFusion services, and get 24/7 email support. (Learn more.)

* Because additional cable increases signal loss (attenuation), you should always use the shortest run of cable possible from the outside donor antenna to the router.

(Click to enlarge)

Features of the Poynting OMNI-414 4×4 MIMO cellular antenna

• 29.5″ omnidirectional outdoor marine antenna.
• Covers today’s 4G/LTE and 5G operating frequencies (617–3800 MHz) with up to 3.5 dBi gain. (Learn more about optimal gain for marine antennas.)
• UV-stable marine ASA radome. IP 68-rated for protection against water immersion and dust and ASTM B117-tested for resistance to corrosion due to salt spray. Rated for wind conditions up to 100 ᴍᴘʜ (160 ᴋᴘʜ / 80 kts.).
• Connects to the four cellular antenna ports on the Peplink MAX BR1 Pro 5G router with 2 × twin 6.6′ (2 m) HDF195 coax cables with SMA-male connectors. Optional 5′, 10′, 15′, 20′, or 30′ extension cables are also available.*
• Marine adapter base is threaded for standard 1″ × 14-thread marine mounts; also mounts to poles 1.5″–2.0″ in diameter with included L-bracket and U-bolts.
• Two-year warranty.
• Optional add-on Shakespeare 4190 rail antenna mount; also works with flange mounts, deck mounts, and mast mounts.

* Because additional cable increases signal loss (attenuation), you should always use the shortest run of cable possible from the outside donor antenna to the router.

Unlock additional features with a PrimeCare+ service pack

One year of PrimeCare service is included with your Peplink router. You can extend your service and enable additional features with the purchase of a PrimeCare+ subscription, available in the dropdown at the top of this page.