5G Marine Coastal Cellular Signal Booster for Large Ships & Motor Yachts

Features of the 5G Marine Coastal Cellular Signal Booster

• The most powerful cellular signal amplifier for multi-deck vessels, including motor yachts, superyachts, naval support ships, research ships, feeder vessels, and other similar ships.
• Combines a high-gain industrial booster with up to 75 dB of downlink gain with your choice of antennas for the best possible signal while underway and while moored. The booster amplifies signal for six bands of 5G/NR and 4G/LTE cellular frequency, including T-Mobile’s 600 MHz band 71.
• Ample uplink power (up to 26 dBm) and downlink power (up to 17 dBm) for a stronger connection to the cell tower and more coverage inside your vessel.
• The cellular signal booster’s color touchscreen LCD display displays the status of each band of frequency and allows you to disable any frequency or manually adjust its gain, if necessary.
• Administer, monitor, and receive system alerts with the Signal Supervisor web portal. (Ethernet connection required.) Unlike competing systems, Signal Supervisor is included with your purchase and has no recurring subscription fees.
• Your choice of outside high-gain marine antenna. (Get help choosing the right antenna.)
• 29.5″ Poynting OMNI-493 UV‑stable ASA antenna with 6 to 9 dBi of gain.
• 81.9″ RFI CDQ7199 Q-Fit® fiberglass antenna with 4.5 to 8.5 dBi of gain and a quick-release feature for easy, fast setup and takedown.
• Your choice of four inside puck or panel antennas. (Get help choosing the right antenna.)
• Poynting PUCK-1 omnidirectional dome antenna with up to 4.5 dBi of gain and six mounting options.
• Top Signal EDGE directional panel antenna with up to 7.2 dBi of gain and four mounting options.
• Includes eight runs of pre-terminated low-loss 400-type coax cables in various lengths to connect the antennas to the cell signal booster.

The 5G Marine Coastal Cellular Signal Booster improves cellular reception for ships and vessels that are moored and underway. Stay connected throughout your vessel while sailing in coastal waters, in harbors, at anchor, and while docked. Experience faster 5G/4G data and fewer dropped calls, undelivered texts, and missed email messages.

Industrial boosters require carrier approval

Under the framework developed by the Federal Communications Commission (FCC), the HiBoost Pro25T-6s is classified as an industrial signal booster. You will need approval from the carriers this booster amplifies before installing the Pro25T-6s and commissioning it on their networks.

For more information about or assistance with this requirement, please contact Powerful Signal—we’ll be happy to help you navigate the approval process.

Your choice of inside antennas

The 5G Marine Coastal Cellular Signal Booster includes four inside antennas for broadcasting amplified cell signal in the compartments in your ship.

Poynting PUCK-1

The Poynting PUCK-1 antenna has six mounting options for the greatest flexibility of installation. (Click to enlarge.)

The Poynting PUCK-1 is a small (3.9″ ᴅ × 1.4″ ʜ) omnidirectional dome antenna with six flexible mounting options, including magnetic and adhesive bases. It has 4.5 dBi of gain on high-band cellular frequencies (1710–2700 MHz) and nominal gain (−2 dBi) on low-band frequencies (698–960 MHz). It should be mounted to a horizontal surface (like a deckhead) in the center of the compartment where you want to improve cellular signal.

The PUCK-1 has 6.6′ of thin RTK031 coax cable, terminating in a 0.35″ SMA-male connector that can be easily fed between decks. From there, it attaches to the longer, thicker 400-type coax cables that run to the cell signal booster.

The PUCK-1 is the right choice if you need a small antenna with the most mounting options and the smallest penetration point between the deckhead and wiring conduit.

Top Signal EDGE panel

The Top Signal EDGE panel antenna can be mounted flush to flat surfaces with the included bracket hardware. (Click to enlarge.)

The Top Signal EDGE is a compact (6.9″ ʜ × 6.9″ ᴡ × 2.7″ ᴅ) directional panel antenna with four mounting options, including a bracket for attaching to walls. It has 4.3 to 5.8 dBi of gain on lower-band cellular frequencies (617–960 MHz) and 7.0 to 7.5 dBi of gain on high-band frequencies (1850–2700 MHz). It should be mounted to a vertical surface (like a bulkhead) and pointed in the direction where you want to improve cellular signal.

The EDGE panel has a 13″ RG58 coax pigtail cable, terminating in a 0.61″ N-female connector. From there, it attaches to 400-type coax cables that run to the cell signal booster.

The EDGE panel is the right choice if you cannot attach an antenna overhead or need to project signal across a long, narrow compartment or passageway. It requires a larger penetration point than the PUCK-1 antenna’s SMA-male connector.