WilsonPro 710i installation guide (PDF)
WilsonPro 710i spec sheet (PDF)
Top Signal LPDA antenna TS220971 spec sheet (PDF)
Top Signal EDGE dome antenna TS250620 spec sheet (PDF)
Top Signal TS‑400 coax TS340000 spec sheet (PDF)
What’s my actual cell signal strength?
Free shipping on orders over $200!
The WilsonPro 710i commercial cell signal booster is the only band 71-specific commercial-grade cellular amplifier available for less than $1,500. It boosts T-Mobile’s 600 MHz cellular service used in rural and remote areas. The Pro 710i is wall-mounted and can cover up to 50,000 square feet with one inside broadcast antenna (with sufficient outside signal strength).
The WilsonPro 710i’s onboard software continuously monitors and adjusts the amplifier’s gain level, as needed. With Wilson’s patented XDR (eXtended Dynamic Range) technology, the Pro 710i will never overpower or shut down due to overly strong outside signal.
Under the framework developed by the Federal Communications Commission (FCC), the WilsonPro 710i is classified as an industrial signal booster
. You will need approval from T-Mobile (or your band 71 carrier, if it is someone other than T-Mobile) before installing the WilsonPro 710i and commissioning it on the network.
To obtain permission from T-Mobile, download their rebroadcast agreement (Microsoft Word .docx), complete it, and email it to rebroadcastagreements@t-mobile.com. We recommend including a simple system design sketch with your application, showing the location of the antennas, cables, and booster in your building. It may take several weeks for T-Mobile to approve your application.
If you need help completing the rebroadcast agreement, please don’t hesitate to contact us.
The WilsonPro 710i is a high-gain, high-powered booster designed for large indoor commercial spaces. Even with Wilson Electronics’s built-in XDR (eXtended Dynamic Range) technology, using the Pro 710i in a large home or small business increases the chances that the signal patterns from the inside and outside antennas will overlap each other and cause signal oscillation or booster shutdown.
To mitigate that potential issue, Powerful Signal’s WilsonPro 710i kit includes two attenuators. Attenuators reduce the signal the booster sends and receives from one of its antennas, reducing or eliminating signal oscillation. If you experience signal oscillation, one of our technical support specialists may recommend that you attenuate the signal the Pro 710i booster sends to and from the inside dome antenna by 10 dB, 20 dB, or 30 dB.
The WilsonPro 710i cell signal booster system includes 400-type coax cable that connects the amplifier to the inside broadcast antenna. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, providing stronger signal from your WilsonPro 710i and a wider indoor coverage area.
(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)
This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.
In a large building, office, or warehouse, you’ll get the best results and performance from the WilsonPro 710i with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 435-634-6800 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
An office floor with amplified cellular signal from a WilsonPro 710i amplifier and one dome antenna.
The WilsonPro 710i can be self-installed if you are familiar with cellular amplification equipment. We’ll be happy to advise you on the best placement of antennas or provide a custom, turnkey solution. If you purchase this system as a standalone product, it includes the following components:
WilsonPro 710i 50‑ohm cell signal amplifier 460064
Locking AC power supply 850023
Top Signal wideband outdoor directional antenna TS220971
Top Signal EDGE indoor dome antenna TS250620
75′ Top Signal TS‑400 coax with N‑male connectors TS340075
50′ Top Signal TS‑400 coax with N‑male connectors TS340050
Top Signal −10 dB attenuator TS471110
Top Signal −20 dB attenuator TS471020
Top Signal 50‑ohm lightning surge protector TS450001
Adjustable rooftop antenna mount TS430001
WilsonPro 710i installation guide
The WilsonPro 710i receives available outside cell signal, amplifies it, and rebroadcasts it inside your building. This allows you to stay connected in areas where cell service is poor or where your building’s construction materials interfere with signals from local cell towers.
This system comes with one dome antenna that broadcasts improved cellular signal in a spherical pattern. The radius of that circle depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has has been designing and installing cellular amplification systems since 2007. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of industrial cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our WilsonPro warranty information page.
Questions & Answers
