Poynting 4×4 MIMO OMNI-414 5G/LTE Marine Antenna for WiFi Routers & Hotspots 617–3800 MHz

For 4×4 cellular routers, modems, and hotspots

For use with 4×4 cellular–WiFi routers
29.5″ wideband 4×4 MIMO outdoor antenna for boats, ships & vessels
3.5 dBi gain (1710–2700 MHz) / 1.8 dBi gain (3400–3800 MHz) for 5G & 4G frequencies
Adapter base (included) attaches to a 1″ × 14 threaded marine mounts
2 × twin 6.6′ HDF195 coax cables with 4 × SMA‑male connectors
Optional add‑on 5′ to 30′ 195 coax extension cables
Optional add‑on adapters for TS9 & U.fl ports

Current Stock:

Quantity:

Product Description

Connects to a 4×4 cellular–WiFi router, hotspot, or modem. Does not connect to a cell signal booster.

Features of the Poynting OMNI-414 MIMO marine antenna

25.4″ × 3.0″ (646 × 75 mm) omnidirectional MIMO outdoor marine antenna. (29.5″ height with marine mount adapter base attached.)
Connects to 4 cellular ports on a cellular–WiFi router, modem, or hotspot with 2 × twin 6.6′ (2 m) HDF195 coax cables and 4 SMA‑male connectors.
TS9 and U.fl/MHF adapters and 5′ to 30′ 195 coax cable extensions available as optional add‑ons.
Covers today’s 4G/LTE and 5G operating frequencies, including T-Mobile band 71 and 3.3–3.8 GHz CBRS and C‑band. (Learn more about optimal gain for marine antennas.)
−0.5 dBi gain on 617–960 MHz (SMH/CLR cellular).
3.5 dBi gain on 1710–2700 MHz (AWS/PCS/WCS/BRS cellular).
1.8 dBi gain on 3400–3800 MHz (CBRS/C‑band cellular).
UV-stable marine ASA enclosure.
Antenna is IP 68-rated for protection against water immersion and dust and ASTM B117-tested for resistance to corrosion due to salt spray. It is rated for wind conditions up to 100 ᴍᴘʜ (160 ᴋᴘʜ / 80 kts.).
The included marine adapter base is threaded for standard 1″ × 14‑thread marine mounts.
Also mounts to poles 1.5″–2.0″ in diameter with included L‑bracket and U‑bolts.
50‑ohm impedance.
2‑year warranty.

Features of the Poynting OMNI-414 Marine MIMO 4x4 Antenna A-OMNI-0414-V1-01

Installation

The Poynting OMNI-414 MIMO marine antenna includes an adapter base that attaches to a 1″ × 14‑thread marine mount. (If you need a marine mount, we offer a Shakespeare 4190 steel ratchet rail mount as an optional add‑on, above.)

You’ll feed the antenna’s 2 × dual HDF195 coax cables through the bottom of the adapter base. This requires a cut‑out in the marine mount or a pentration point below it for the cable to pass through. (See image below.)

Click here to download the PDF user guide for installation instructions.