WilsonPro 70 install guide (PDF)
WilsonPro 70 spec sheet (PDF)
Top Signal omni antenna TS210471 spec sheet (PDF)
Top Signal dome antenna TS250374 spec sheet (PDF)
Top Signal 400 coax cable spec sheet (PDF)
Top Signal half‑inch coax cable spec sheet (PDF)
Top Signal 3‑way splitter TS413001 spec sheet (PDF)
What’s my actual cell signal strength?
Free shipping on orders over $200!
Discontinued
This WilsonPro 70 system is a three-antenna option designed for offices or in-building areas that need improved cell signal reception and greater signal coverage than 1- or 2-antenna systems. This system improves both voice and data to reduce dropped calls and missed emails and texts. Keep your business and employees connected with a stronger cell signal.
This kit includes three (3) inside dome antennas that send amplified signal to the cell phones in your office.
Sample WilsonPro 70 three‑antenna setup
The WilsonPro 70 kit comes standard with ⅜‑inch 400 coax cable. Powerful Signal offers you the choice to upgrade to ½‑inch carrier-grade coax cable, which will increase the broadcast radius of your inside antenna and double the square footage your Pro 70 system will cover.
Click the Performance Level option above the Add To Cart button and take advantage of increased coverage in your office!
The low-loss ½‑inch cable option doubles the square footage of your cell signal amplifier system.
In a large building, office, or warehouse, you’ll get the best results and performance from a WilsonPro 70 with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 866-912-3444 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
An office floor flooded with cellular signal from a WilsonPro amplifier and one dome antenna.
Properly installing and configuring the WilsonPro 70 is complex task, and we strongly advise a custom solution (see Best Practices, above). If you prefer to purchase a Pro 70 as a standalone product, without design and installation, the kit comes with the following components:
WilsonPro 70 cell signal amplifier
AC wall outlet power supply 850010
Wideband outdoor omni antenna TS210471
Wideband indoor dome antenna TS250374 (×3)
75′ 400 coax cable TS340075
50′ 400 coax cable TS340050 (×3)
30′ 400 coax cable TS340030
3-way splitter TS413001
Adjustable rooftop antenna mount TS430001
50‑ohm lightning surge protector TS450001
WilsonPro 70 install guide
The WilsonPro 70 system includes 400-type coax cable to connect the amplifier to the inside antennas. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½‑inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the WilsonPro amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 866-912-3444 for details.)
This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.
Using Wilson Electronics’ patented SmarTech III® technology, the WilsonPro 70 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office through three ceiling-mounted dome antennas. This allows you to stay connected in areas where cell service is poor or where your office’s building materials interfere with signals from the local cell tower.
The WilsonPro 70 works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.
It operates on common 4G/3G cellular frequencies.
This system comes with three dome antennas that will broadcast improved cellular signal in a spherical pattern. The radius of that circle depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866‐912‐3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
Some online retailers claim that a one-antenna WilsonPro commercial system will provide 50,000 square feet of coverage. That figure is unrealistic under typical conditions, and Powerful Signal warns consumers against purchasing WilsonPro systems from retailers who make such exaggerated claims.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our WilsonPro warranty information page.
Questions & Answers
