The WilsonPro 1000 two-antenna system is wall-mounted, with a single amplifier and two inside dome antennas. The dual-antenna setup provides two zones of coverage in large office buildings, warehouses, hospitals, hotels, campuses, and other facilities. With strong outside cell signal (around −80 dBm) the WilsonPro 1000 can cover two zones of 15,000 to 30,000 square feet each (depending on the cellular frequency being amplified).
The WilsonPro 1000 automatically controls the amplifier with its on-board software, and adjusts the gain level for each port independently, up or down, as needed. It can reduce its gain to prevent oscillation, and with Wilson’s XDR (eXtended Dynamic Range) technology, the Pro 1000 will never overpower or shut down.
The color LCD screen and D-pad navigation controller allow installers and administrators to monitor and adjust the gain of the various cellular frequencies the Pro 1000 supports.
The WilsonPro 1000 system includes 400-type coax cable to connect the amplifier to the inside antennas. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the WilsonPro amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 866-912-3444 for details.)
In a large building, office, or warehouse, you’ll get the best results and performance from a WilsonPro 1000 with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes, and have the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 866-912-3444 or request a free custom quote online. We can design a custom cellular amplification system that will solve your reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems; let us create one for you!
Properly installing and configuring a WilsonPro 1000 is complex task, and we strongly advise a custom solution (see above). If you prefer to purchase this system as a standalone product, without design and installation, the kit comes with the following components:
Using Wilson Electronics’ patented SmarTech III® technology, the WilsonPro 1000 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office. This allows you to stay connected in areas where cell service is poor, or where your office’s building materials interfere with signals from the local cell tower.
The WilsonPro 1000 works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.
It operates on common 4G/3G cellular frequencies.
This system comes with two dome antennas that broadcast improved cellular signal in a spherical pattern. The radius of each circle depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866‐912‐3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
Some online retailers claim that a one-antenna WilsonPro commercial system will provide 50,000 square feet of coverage. That figure is unrealistic under typical conditions, and Powerful Signal warns consumers against purchasing WilsonPro systems from retailers who make such exaggerated claims.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For warranty information on this product, please see our WilsonPro warranty information page.