WilsonPro 1050 user manual (PDF)
WilsonPro 1050 spec sheet (PDF)
Wilson LPDA antenna 314411 spec sheet (PDF)
Wilson dome antenna 304412 spec sheet (PDF)
What’s my actual cell signal strength?
Discontinued
Product Description
The WilsonPro 1050 inline cellular DAS system is a wall-mounted, dual-amplifier system designed for long or tall buildings. The Pro 1050 system includes a small, inline amplifier that boosts the signal from the main amplifier on its way to the inside antenna.
Example of a WilsonPro 1050 inline system installed in a long building (click to enlarge)
The Pro 1050 allows for unique setups where the main amplifier has to be installed a long distance away from the inside broadcast antenna. For example, a 25-story high-rise office building needs improved cell signal only on the first floor; the rooftop antenna and main amplifier could be installed on the top floor, with 250 feet of 400 coax cable running to the bottom floor and the inline amplifier boosting the signal mid-way through the run of cable.
The Pro 1050 automatically controls both amplifiers with onboard software, and adjusts the gain level as needed. It can reduce its gain to prevent oscillation, and with Wilson’s XDR (eXtended Dynamic Range) technology, the Pro 1050 will never overpower or shut down.
The black-on-white LCD screen and 4-button controls allow installers and administrators to monitor and adjust the gain of the various cellular frequencies the Pro 1050 supports.
Please note: The WilsonPro 1050’s main amplified and inline amplifier are paired and work only with each other. The main amplifier will not work without the inline amplifier, and the inline amplifier will not work with any other amplifier.
The WilsonPro 1050 system includes 400-type coax cable to connect the main amplifier, the inline amplifier, and the inside antenna. If your building requires fire-rated cable
in plenum spaces, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the WilsonPro amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)
This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.
In a large building, office, high-rise, or warehouse, you’ll get the best results and performance from a WilsonPro 1050 with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 435-634-6800 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
An office floor with amplified cellular signal from a WilsonPro amplifier and one dome antenna.
The WilsonPro 1050 can be self-installed if you are familiar with cellular amplification equipment. We’ll be happy to advise you on the best placement of antennas or provide a custom, turnkey solution. If you purchase this system as a standalone product, it includes the following components:
WilsonPro 1050 main cell signal amplifier
WilsonPro 1050 inline cell signal amplifier
6′ locking AC power cable
Wilson wideband outdoor directional antenna 314411
Wilson wideband indoor dome antenna 304412
100′ WILSON400 coax cable 952300 (×2)
75′ WILSON400 coax cable 952375
2′ WILSON400 coax jumper cable 952302
Wilson 50‑ohm lightning surge protector 859902
WilsonPro 1050 user manual
Using Wilson Electronics’s patented SmarTech III® technology, the WilsonPro 1050 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office through four individual ports. This allows you to stay connected in areas where cell service is poor or where your office’s building materials interfere with signals from the local cell tower.
The WilsonPro 1050 works with all major wireless carriers, including Verizon, AT&T, T-Mobile, DISH Wireless, UScellular, GCI Alaska, and most others.
It operates on common cellular frequencies.
This system comes with one dome antenna that broadcasts improved cellular signal in a spherical pattern. The radius of that circle depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 435-634-6800 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our WilsonPro warranty information page.
Questions & Answers
