WilsonPro 1000R user manual (PDF)
WilsonPro 1000R spec sheet (PDF)
Top Signal omni antenna TS210471 spec sheet (PDF)
Top Signal dome antenna TS250374 spec sheet (PDF)
Top Signal 400 coax cable spec sheet (PDF)
Top Signal 2‑way splitter TS412001 spec sheet (PDF)
What’s my actual cell signal strength?
Free shipping on orders over $200!
Discontinued
The WilsonPro 1000R two-antenna system is rack-mounted, with a single amplifier and two inside dome antennas. The dual-antenna setup provides two zones of coverage in large office buildings, warehouses, hospitals, hotels, campuses, and other facilities. With strong outside cell signal (around −80 dBm) the WilsonPro 1000R can cover two zones of 15,000 to 30,000 square feet each (depending on the cellular frequency being amplified).
This is the industry’s first cell phone signal amplifier designed to be mounted with the rest of your I.T. infrastructure: The Pro 1000R fits into a standard server rack in your I.T. room or closet. Run plenum, HELIAX®, or 400-type coax cable from the outside donor antenna and inside broadcast antennas to your I.T. room, mount the Pro 1000R in your rack, and attach the antenna cables to the back to the amplifier.
The WilsonPro 1000R automatically controls the amplifier with its on-board software, and adjusts the gain level, up or down, as needed. It can reduce its gain to prevent oscillation, and with Wilson’s XDR (eXtended Dynamic Range) technology, the Pro 1000R will never overpower or shut down.
The color LCD screen and D-pad navigation controller allow installers and administrators to monitor and adjust the gain of the various cellular frequencies the Pro 1000R supports.
Sample WilsonPro 1000R two‑antenna setup
The WilsonPro 1000R two‑antenna system includes 400-type coax cable to connect the amplifier to the inside antennas. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the WilsonPro amplifier to your phones and other cellular devices.
(Plenum air cable is available at additional cost. Call Powerful Signal at 866-912-3444 for details.)
This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.
In a large building, office, or warehouse, you’ll get the best results and performance from a WilsonPro 1000R with a custom design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.
Call Powerful Signal at 866-912-3444 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
An office floor flooded with cellular signal from a WilsonPro amplifier and a dome antenna.
Properly installing and configuring the WilsonPro 1000R is complex task, so we strongly advise a custom solution (see above). If you prefer to purchase this system as a standalone product, without design and installation, the kit comes with the following components:
WilsonPro 1000R cell signal amplifier
6′ locking AC power cable
Wideband outdoor omni antenna TS210471
Wideband indoor dome antenna TS250374 (×2)
100′ 400 coax cable TS340100 (×2)
75′ 400 coax cable TS340075
2-way splitter TS412001
2′ 400 coax jumper cable TS340002
Adjustable rooftop antenna mount TS430001
50‑ohm lightning surge protector TS450001
WilsonPro 1000R user manual
Using Wilson Electronics’ patented SmarTech III® technology, the WilsonPro 1000R receives the outside cell signal, amplifies it, and rebroadcasts it inside your office. This allows you to stay connected in areas where cell service is poor or where your office’s building materials interfere with signals from the local cell tower.
The WilsonPro 1000R works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.
It operates on common 4G/3G cellular frequencies.
This system comes with two dome antennas that broadcast improved cellular signal in a spherical pattern. The radius of each circle depends on many factors, including:
In general, the stronger the outside cell signal, the greater the interior broadcast distance.
Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866‐912‐3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.
Some online retailers claim that a one-antenna WilsonPro commercial system will provide 50,000 square feet of coverage. That figure is unrealistic under typical conditions, and Powerful Signal warns consumers against purchasing WilsonPro systems from retailers who make such exaggerated claims.
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Specifications
Warranty Information
For warranty information on this product, please see our WilsonPro warranty information page.
Questions & Answers
