Poynting PUCK-1 5G/LTE Marine Antenna 7 dBi 698–3800 MHz SMA-Male TS210616W

Features of the Poynting PUCK‑1 marine antenna

• 3.9″ ᴅ × 1.4″ ʜ (99.3 × 36 mm) omnidirectional marine, vehicle, and IoT/M2M antenna.
• Attaches outside as a donor antenna or inside as a broadcast antenna in a boat, ship, RV, trailer, van, or other vehicle.
• 6′ 7″ (2 m) flexible RTK031 coax cable with SMA‑male connector.
• Covers 4G/LTE and 5G operating frequencies, including 3.4–4.0 GHz CBRS and C‑band, with 7–8 dBi gain above 1710 MHz.
• Six mounting options (mounting accessories included, except where noted):
  1. Magnetic base attaches to a ferrous surfaces. Includes a side-exit channel for the coax cable.
  2. Surface mount attaches securely to most surfaces with a double-sided 3M® foam adhesive pad.
  3. Spigot mount attaches through a 0.8″ (20 mm) hole with 1.2″ (30 mm) or 2.75″ (70 mm) two-piece threaded spigot posts and nut.
  4. Pipe mount bracket attaches to a vertical or horizontal pole. (Requires a cable tie or hose clamp, purchased separately.)
  5. Wall mount bracket attaches to a drillable vertical surface with screws of appropriate length (purchased separately).
  6. Panel mount attaches through a thin surface with M4×10 mm bolts (included) or through a thicker drillable surface with longer M4 bolts (purchased separately).
• The rugged PC+ABS radome is IK10 impact-rated and IP 69K-rated for protection against water immersion and dust. It’s also rated for wind conditions up to 135 ᴍᴘʜ (220 ᴋᴘʜ ), depending on the selected mounting option.
• Ground plane-independent.
• 50‑ohm impedance.
• 2‑year warranty.