Wilson weBoost Home 3G 473105 Desktop Cell Phone Booster

Wilson weBoost Home 3G 473105 Desktop Cell Phone Booster

1 Room - 3G - Window/Wall/Roof Mount Opton
Item Number:
1 Room 3G Cell Signal Booster
free shipping

Wilson Electronics weBoost Home 3G Booster Kit (473105)

Sample Installation Diagram


  • Single Room or Workspace
  • Boosts 2G/3G cell signal for both voice and data
  • Works with all 3G carriers
  • Works with all 3G cell phones


The Wilson Electronics weBoost Home 3G 473105 Cell Phone Booster Kit is designed to improve cell signal strength in a work space such as a desktop or office cubical or in a small room.  The weBoost Home 3G is a complete kit that includes all necessary components to boost the cell signal for Verizon, AT&T, Sprint, T-Mobile or any other carrier in the US and Canada that uses 800MHz cellular or 1900Mhz PCS.
A 4G version of this is available, the Wilson weBoost Home 4G 470101 Kit is an excellent choice if you have 4G service and a 4G cell phone.

The outside antenna can be mounted on the roof, inside a window or on an outside wall.  A 20' and 30' length of white RG6 coax cable are included with the kit.  Each can be used separately, or they can be used together for 50' total coax cable.  See the installation guide for details.

Powerful Signal Customer Support (866-812-3444) will be glad to assist you with with any questions about the product and installation.  We have lifetime support of any system we sell.
Note:  This system is not designed to cover an entire house.

How should this kit be used?

The Wilson Electronics weBoost Home 3G has been designed by Wilson to boost the cell phone signal (voice and data) in a small area, single room or workspace.  The 60dB gain of this amplifier works nicely for small areas under most conditions.  You should not expect an entire home to be covered with this kit. One of the features of this kit is the multiple mounting options of the outside antenna; pole, window, exterior wall.

Carriers Supported

  • All US 3G Carriers: Verizon, AT&T, Sprint, T-Mobile, US Cellular, Metro PCS, etc
  • All Canadian 3G Carriers: Rogers, Bell, Telus, Wind, etc

Kit Includes

  • Wilson Electronics weBoost 60dB Desktop cell phone booster
  • Inside desktop antenna
  • 20' & 30' white RG6 coax
  • Outside antenna
  • Mounting hardware
  • Installation Guide


  • No physical connection to cell phone or data card
  • Max 60dB Gain
  • Dual-band (3G) 800/1900MHz
  • 1200mw / 1114 mw max uplink power
  • Multiple exterior antenna mounting options
  • Engineered and assembled in the US
  • Supports multiple phone/datacards
  • Complete Kit
  • Automactic oscillation/overload protection
  • FCC and IC type accepted
  • 30 day Money back guarantee
  • 2 Year Warranty
  • Free Shipping in 48 contiguous states
  • Usually ships same day as ordered

Wilson Electronics weBoost Home 3G 473105 Specifications

Model 473105
Frequency (3G) 850 MHz (Band 5)
1900 MHz (Band 25)
Gain Max 60dB
Connectors Inside Antenna: SMA Female
Outside Antenna: F-Female
Dimensions 6.3 x 1.4 x 4.2 in
Booster Weight .45 lbs


FCC Notice This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. 

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.