WilsonPro 4000 Wall-Mount Commercial Signal Booster 460223

4 independently-controlled amplifiers in a single unit | FREE shipping

Enterprise 4G passive DAS solution
Heaviest user loads
Color LCD status & control display
Commercial-grade components
Boost both voice and 4G data
Works with all major cellular carriers

Outside Signal Strength

Coverage @ 700 MHz LTE

5 Bars

Up to 100,000 ft²

3 Bars

Up to 40,000 ft²

1 Bar

Up to 10,000 ft²

Product Description

Features of the WilsonPro 4000

Provides coverage for office buildings, hospitals, campuses, warehouses, and other large facilities.
Wall-mounted, with all antenna ports on the top; fits in any convenient, out-of-the-way room.
Four independent amplifiers, each with its own port and automatic XDR gain adjustment, supporting 4 to 16 or more broadcast antennas.
Color LCD setup screen and power meter with D-pad controller.
Boosts 4G LTE and 3G service for voice, text, and data.
Carrier agnostic: Works with all major U.S. cellular carriers and networks.

The WilsonPro 4000 is a wall-mounted, four-amplifier system designed for office buildings, warehouses, hospitals, hotels, campuses, and other large facilities. One WilsonPro 4000 can cover 100,000 to 140,000 square feet, with support for 16 or more inside broadcast antennas (depending on outside signal strength).

The WilsonPro 4000 automatically controls the four built-in amplifiers with its on-board software, and adjusts the gain level for each port independently, up or down, as needed. Any one amplifier port can reduce its gain to prevent oscillation without decreasing coverage to the other three ports. And with Wilson’s XDR (eXtended Dynamic Range) technology, the Pro 4000 will never overpower or shut down.

Also unique to the WilsonPro 4000 is its color LCD screen and D-pad navigation controller, which allows installers and administrators to monitor and adjust the gain of the various cellular frequencies the Pro 4000 supports.

Who is the WilsonPro 4000 for?

Office buildings, medical/business/education/government campuses, warehouses/distribution centers, and other multi-floor and/or large buildings.
Those who have heavy cellular user and data loads.
Those who have multiple areas that need better cell signal.
Those who frequently experience dropped calls, undelivered texts, or slow 4G data.
Buildings in urban locations with building materials that block outside cell signal (steel, low-e glass, concrete, plaster, etc.).
Buildings with floor space below ground level, and other places where cell reception is poor.

Optional plenum air coax cable upgrade

The WilsonPro 4000 system includes 400-type coax cable to connect the amplifier to the inside antennas. If your building requires fire-rated cable in plenum spaces, please ask us about upgrading to ½-inch plenum air coax. Plenum cable fully meets state and federal building codes.

Plenum cable also has nearly half the signal loss per foot of cable compared to 400-type coax cable, delivering stronger signal from the WilsonPro amplifier to your phones and other cellular devices.

(Plenum air cable is available at additional cost. Call Powerful Signal at 866-912-3444 for details.)

400-type coax cable and plenum air coax cable terminated with N-male connectors

This system uses 400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.

Best practices: a custom-designed WilsonPro 4000 solution

In a large building, office, or warehouse, you’ll get the best results and performance from a WilsonPro 4000 with a custom design and professional installation.

Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your building.

Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly.

Call Powerful Signal at 866-912-3444 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!

Office floor with a WilsonPro cellular DAS system and dome antenna

An office floor flooded with cellular signal from a WilsonPro amplifier and one dome antenna.

Purchasing a WilsonPro 4000 system

Properly installing and configuring the WilsonPro 4000 is complex task, so we strongly advise a custom solution (see above). If you prefer to purchase this system as a standalone product, without design and installation, the kit comes with the following components:

WilsonPro 4000 cell signal amplifier

6′ locking AC power cable

Wideband outdoor omni antenna TS210471

Wideband indoor dome antenna TS250374 (×4)

100′ 400 coax cable TS340100 (×4)

75′ 400 coax cable TS340075

Adjustable rooftop antenna mount TS430001

50‑ohm lightning surge protector TS450001

WilsonPro 4000 user manual

How the WilsonPro 4000 works

Using Wilson Electronics’ patented SmarTech III® technology, the WilsonPro 4000 receives the outside cell signal, amplifies it, and rebroadcasts it inside your office through four individual ports. This allows you to stay connected in areas where cell service is poor or where your office’s building materials interfere with signals from the local cell tower.

Works with all major cellular carriers

The WilsonPro 4000 works with all major wireless carriers, including Verizon, AT&T, T‑Mobile, Sprint, U.S. Cellular, and most others.

It operates on common 4G/3G cellular frequencies.

700 MHz (SMH) bands 12, 13, 17.
850 MHz (Cellular 850) band 5.
1700/2100 MHz (AWS) band 4.
1900 MHz (PCS) bands 2, 25.

How much area will the WilsonPro 4000 cover?

This system comes with four dome antennas that each broadcast improved cellular signal in a spherical pattern. The radius of that circle depends on many factors, including:

Outside cell signal strength received by the donor antenna.
Inside building materials. (Cellular frequencies pass through wood framing and drywall more easily than through steel and concrete.)
Cellular frequencies used by the carrier. (Lower-frequency LTE and 800 MHz signals travel farther than higher-frequency AWS and PCS signals.)

In general, the stronger the outside cell signal, the greater the interior broadcast distance.

Powerful Signal has over a decade of experience designing and installing cellular amplification systems. Please call us at 866‐912‐3444 or contact us online, and we’ll be happy to calculate the coverage area this system will provide in your building and answer any other questions about this amplifier.

Some online retailers claim that a one-antenna WilsonPro commercial system will provide 50,000 square feet of coverage. That figure is unrealistic under typical conditions, and Powerful Signal warns consumers against purchasing WilsonPro systems from retailers who make such exaggerated claims.

FCC notice

For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.

Prop 65 notice

Caution triangle icon Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Top Signal ½-Inch Plenum Air Coax 100 ft. N-Male Connectors TS350100

Chat or Call for Pricing

WilsonPro 4000 Wall-Mount Commercial Signal Booster 460223

WilsonPro (Discontinued)