CEL-FI GO G43 data sheet (PDF)
CEL-FI GO G43 user manual (PDF)
CEL-FI GO G43 AC/DC power supply spec sheet (PDF)
What’s my actual cell signal strength?
Free shipping on orders over $200!
Keeping customers, staff, and systems connected through reliable cellular coverage, CEL-FI GO G43 is an “off-air” solution that brings strong cellular signal from outside the building indoors. A GO G43 system improves coverage for up to three carrier networks, enabling strong in-building connectivity for in-store digital couponing, payment systems, backup or redundancy for other networks, inventory management, and much more.
An office floor with amplified cellular signal from a CEL-FI GO G43 and four dome antennas. (Click to enlarge.)
The CEL-FI GO G43 in-building cellular solution can provide indoor coverage for up to 50,000 square feet or more (depending on outside signal strength). This makes it an ideal solution for small and mid-sized businesses and large homes.
Buildings that would benefit from a GO G43 solution include:
An office floor with amplified cellular signal from a CEL-FI GO G43 with one dome antenna.
You’ll get the best results and performance from a CEL-FI GO G43 with a custom ProWay design and professional installation.
Working with your floor plans, Powerful Signal’s design engineers will create design specifications that will allow you to use the fewest number of components to get the maximum amount of cellular coverage inside your home or office.
Powerful Signal’s professional installer will have knowledge of local building codes and the proper tools and experience to make sure your system is set up and configured correctly. We also offer a managed installation in which we support your I.T. professionals with system design documents and technical support.
Call Powerful Signal at 435-634-6800 or request a free custom quote online. We’ll design a custom system that will solve your cellular reception and connectivity problems at the best possible price point. We’ve designed thousands of cell signal amplifier systems—let us create one for you!
The CEL-FI GO G43 system is typically installed using TS‑400 coax cable to connect the amplifier to the outside and inside antennas. If your building requires fire-rated cable
in plenum spaces, please ask us about upgrading to half-inch plenum air coax. Plenum cable fully meets state and federal building codes.
Plenum cable also has nearly half the signal loss per foot of cable compared to TS‑400 coax cable, providing stronger signal from your GO G43 booster and a wider indoor coverage area.
(Plenum air cable is available at additional cost. Call Powerful Signal at 435-634-6800 for details.)
This system uses TS‑400 coax (left), but you can upgrade to fire-rated plenum air coax cable (right) for building-code compliance and better performance.
The Nextivity CEL-FI GO G43 boosts the signal from the three largest U.S. cellular networks:
For information on federal rules governing the use of consumer cell signal boosters, please see our FCC notice page.
Warning This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Specifications
Warranty Information
For warranty information on this product, please see our Nextivity warranty information page.
Questions & Answers
