Wilson weBoost EQO "Echo" Home Cell Phone Booster 473120-A (Bonus Outdoor Antenna)

Wilson weBoost EQO "Echo" Home Cell Phone Booster 473120-A (Bonus Outdoor Antenna)


NEW - 1 Room - 4G - Window Mount. Includes Bonus Outside Antenna Option.
Price::
$374.95
Item Number:
473120-A
Bonus Outside Antenna Kit
Extended Warranty

Wilson Electronics weBoost 473120 EQO Cell Phone Booster

weBoost EQO 473120 Cell Phone Booster for a Room   Outside Antenna Bonus Kit

Highlights

  • Boosts 2G/3G and 4G Voice and Data Signals
  • Easy to Install
  • Setup in minutes
  • Works with all major US and Canadian Carriers
  • Lifetime support
  • 2 Year Manufacturer Warranty
  • Includes Bonus Outside Antenna Option

Overview

Need a stronger cell signal in a room of your home, apartment, condo, RV, etc.?  The Wilson weBoost EQO (pronounced echo) has been specifically designed to boost 3G and 4G cell phone signals in a work area or room with a quick, easy window installation.  Reduce your dropped calls and missed texts and emails with a stronger cell phone signal.
 
The Wilson Electronics weBoost EQO is very, very easy to install and can be setup in minutes.  No outside exterior antenna is required on the roof with the EQO.  There are two (2) basic components that need to be connected together inside your room:
 

EQO Cell Phone Booster

The EQO Booster is designed to sit on a window sill pointing out towards the cell phone tower.  This is the only component that requires power.  It needs to be plugged into a 110v wall plug.

EQO Interior Antenna

The EQO interior antenna is designed to broadcast an amplified cell signal in the room.  This antenna needs to be 6 or more feet away from the cell phone booster in the window and it needs to be pointing away from the cell phone booster.

EQO Coax Cable

A 20 foot RG174 coax cable (very thin) is supplied with the EQO kit.  This coax cable is used to connect the interior broadcast antenna to the cell phone booster on the window sill.

Bonus Outside Antenna Option (Omni Exterior Antenna, 30' 400 Coax, J-Pipe Mount)

This kit comes with a BONUS outside antenna option which can be mounted on the roof or exterior wall.  This kit includes a 4G Omni antenna, 30' of low loss 400 coax cable to connect to the exterior antenna, a 3' jumper to connect the 400 coax to the weBoost EQO outside antenna port.  The use of the Outside Antenna Kit is not required.  It is included in the event that an exterior antenna is needed to collect signal for the EQO.  The weBoost EQO should be initially setup without the outside antenna option to see if acceptable performance is achieved.
 

How should this kit be used?

Primary use of the Wilson Electronics weBoost EQO is for small workspaces or single room locations where exterior antennas are difficult or impossible to install.  A good example are rental units that do not allow external antenna mounting or high-rise residential locations where mounting an external antenna is not possible.  The weBoost EQO is designed for around 150 to 200 sq feet, a small room or workspace, not an entire 2,000 sq ft home or condo.
 
One of the most important things to remember about the EQO kit is that it requires some cell signal at the window where it is setup.  There are exceptions to this, but not many.  The Outside Antenna Kit has been included to give you the option of putting a antenna on the roof if needed.  Contact Powerful Signal (866-912-3444) and our Customer Support staff with be happy to answer any questions you have about this product.
 

Carriers Supported

  • All Major US Carriers: Verizon, AT&T, Sprint, T-Mobile, US Cellular, Metro PCS, etc
  • All Major Canadian Carriers: Rogers, Bell, Wind, Telus, Fido, etc.

Features - Wilson weBoost EQO 473120 Cell Phone Booster 

  • Conforms to new FCC regulations for March 1, 2014
  • Installs in minutes
  • Improved call quality, reduces dropped calls, missed texts and emails
  • No monthly fees
  • No Internet required
  • Works with US and Canadian cell phones and carriers.
  • Boosts 4G, 3G, voice and data
  • Complete kit: booster, coax cable, and antennas
  • Improves cell signal in a work area, 1 to 2 rooms (depending upon strength of outside signal)
  • Does not require any physical connection to your cell phone
  • Allows multiple cellular devices to be used simultaneously
  • Bi-directional - Boosts cell signals to and from cell tower
  • Automatic oscillation/overload protection
  • Lifetime support
 

Kit Includes

  1. Wilson Electronics weBoost EQO Cell Phone Booster
  2. Wilson Electronics weBoost EQO Interior Antenna
  3. 20' RG174 Coax to connect booster to antenna
  4. Power Supply
  5. Installation Guide
  6. Bonus 4G Outside Antenna ($69.95)
  7. Bonus 30' Low Loss 400 Coax Cable ($49.95)
  8. Bonus 3' Jumper to connect boost to 400 coax ($14,95)
  9. Bonus Universal J-Pipe Mount for outside antenna ($19.95)

weBoost EQO Cell Phone Booster 

The cell phone booster in the Wilson weBoost EQO is designed to sit on a window sill.  It collect the cell signal at the window and amplifies the signal, sending to to the interior broadcast antenna to be re-broadcasts inside.  The weBoost EQO does require some cell signal at the window unless the Outside Antenna Option is used.  The stronger the signal at the window or where the outside antenna is located, the more broadcast area the interior antenna can achieve.

NOTE:  If possible, use a window that opens in the direction of your cell phone tower.
 

Interior Broadcast Antenna 

The weBoost EQO interior broadcast antenna is connected to the booster using 20 feet of RG174 coax cable.  The interior antenna needs to be pointed away from the cell phone booster located on the window sill.

Basic Installation Instructions

weBoost EQO 473120 Cell Phone Booster

Below are the 5 basic steps to install the EQO Cell Phone Booster.  More detail is supplied with the Installation Guide.
  1. Place your Booster in the area with the strongest cell phone signal.  The LED light should be facing into the room.
  2. Connect the supplied Coax Cable and Power Supply on the side of the Booster
  3. Place the Interior Antenna where you need to boost your signal.  It should face the same direction as the Booster stand at least 6 feet away from it.
  4. Connect the other end of the Coax Cable to the Antenna.
  5. Connect the Power Supply to a surge protected AC power strip with at least 1000 Joule rating.
 
Would you like to read some more information?  Click HERE for an article written about the weBoost EQO.

 
 

weBoost Home 4G 470101 Specifications

Product Number 473120
Gain Band 12/17 61dB (700 MHz)
Gain Band 13 62dB (700 MHz)
Gain Band 5 62dB (800 MHz)
Gain Band 4 68dB (1700/2100 MHz)
Gain Band 2 70dB (1900 MHz)
Antenna Connectors SMA-Female on the Inside Antenna / F-Female on the Outside Antenna
Antenna Impedance 50 Ohms
Weight
Dimensions
Frequency 704-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz
Noise Figure (typical downlink/uplink 5dB Nominal
Power Requirements 5V/2.5A
FCC ID: PWO0460032
IC (Canada) 4726A-460032
FCC Notice This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. 

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.