Discontinued - Wilson 462105 DB Pro 3G Booster with Omni Antenna

Discontinued - Wilson 462105 DB Pro 3G Booster with Omni Antenna

New Wilson 462105 meets the new 2014 FCC regulations. This 3G voice and data booster works with all major US carriers including Verizon, AT&T, T-Mobile, and sprint. Comes with everything needed to boost your cell signal in one or two rooms in your home.
Item Number:
Discontinued by Manufacturer
Connector: F-Female
Gain: 65dB
Application: Cellular/PCS, 2G/3G
Manufacturer Warranty: 1 Year



Wilson 462105 3G DB Pro Product Description

This is the newly engineered Wilson DB Pro 3G that conforms to all the new FCC regulations established for 2014.  This unit replaces the Wilson 841262.  The new Wilson 462105 DB Pro 3G Kit boosts and improves 3G cell signals for both voice and data.  The cell signal booster works with all the major U.S. cellular carriers including Verizon, T-Mobile, AT&T, and Sprint.  This is a complete kit that includes a 3G dual-band booster, outside antenna to communicate with the cell tower, interior antenna to broadcast a boosted signal, and white RG6 coax cable to connect the antennas to the cell signal booster.
The Wilson DB Pro 3G is an excellent choice to boost cell signals in one or two rooms of a home or small office.  Broadcast distance inside the building varies on the outside signal strength and the frequency the cellular carrier uses.  If you have any questions on how much area the Wilson DB Pro 3G will cover, contact Powerful Signal for details.
The kit does require some minor installation.  An antenna needs to be placed on the roof of the building.  This antenna is connected to the cell signal booster with a length of RG6 coax supplied in the kit.  The interior broadcast antenna can usually be placed in the attic of the home or building facing downwards through the sheet rock or dropped ceiling.  The interior antenna also has the ability to be mounted on a wall.  RG6 coax cable is also supplied to connect the interior antenna to the cell signal booster.
Contact Powerful Signal if you have any questions regarding the coverage distance of this system. 
Setup diagram of the Wilson 841262 DB Pro Kit



Wilson 462105 DB Pro 3G Booster

The new Wilson 462105 has been designed to meet the new 2014 FCC regulations.  This amplifier replaces the Wilson 801262 booster.  This 65 dB gain cell signal booster works with all major US 3G carriers including Verizon, T-Mobile, AT&T, Sprint, etc. The size of the 462105 cell signal booster allows it to boost signal in one or two rooms in a home or small office.  The stronger the signal is outside the more the amplifier can broadcast inside the home.
The amplifier casing is plastic with F-Female connectors.
Wilson DB Pro 3G Booster 

Omni Outside Antenna

The Omni antenna included with this kit receives and broadcasts in 360º.  This means, providing there are no obstacles, it can communicate with any 3G cellular tower within range.  Most of the time carrier towers are not in the same location and are scattered about.  The Omni antenna is the best for this situation and will work will towers in all directions.
Wilson 301201 Omni Directional Antenna
Omni-Directional Antenna

Inside Antenna

The Wilson panel included in this kit may be used on a wall or may be placed in the attic, set on the ceiling sheet rock facing downwards into the rooms below.  Mounting hardware is included for wall mounting.
The antenna has about an 85 degree horizontal beam and about a 45 degree vertical beam.
NOTE: The interior panel antenna should not be pointed directly at the exterior Omni antenna.  This may cause oscillation and cause the system to shut off.
Wilson panel antenna
Wilson Panel Antenna

RG6 Coax

This kit comes with 2 lengths of white RG6 75 ohm coax.  This is the same type of coax used for cable TV.
  1. 20' White RG6 Coax
  2. 30' White RG6 Coax
Remember that coax has loss.  Only use what you need, and don't coil any excess coax.  The more coax you use, the weaker the interior broadcast will be.

Kit Components

  1. Wilson 462105 DB Pro booster
  2. Wilson 301135 wall panel antenna
  3. Wilson 301201 Omni
  4. 20', 30' white RG6 coax
  5. Mounting hardware
  6. Installation Guide

Recommended Additional Parts (Optional)

  1. Universal J-Pipe Mount (by Powerful Signal)
  2. Lightning Surge Protector (by Powerful Signal)
  Wilson 462105 DB Pro 3G cell signal booster
Wilson 462105 DB Pro 3G

   View the Wilson 462105 DB Pro 3G Installation Guide

FCC Notice This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. 

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.