Wilson weBoost Connect 4G-X 471104 Building Cell Phone Booster (Three Antennas)

Wilson weBoost Connect 4G-X 471104 Building Cell Phone Booster (Three Antennas)

Home/Office - 4G - 3 Panel Antennas
Item Number:
3 Antenna 4G Home/Building System (Bonus Accessories)
free shipping
Extended Warranty

Wilson Electronics weBoost Connect 4G-X 3 Antenna Cell Phone Booster Kit

This 3 interior antenna weBoost Connect 4G-X 471104 cell signal booster has three interior panel antennas for more coverage that works with Verizon, AT&T, Sprint, and T-Mobile to boost 2G, 3G, and 4G voice and data signals for a small building.  This product is eligible for extended warranty.
Sample 3 antenna lay for building
This cell phone booster works well in homes or small building environments.  This is a complete kit that includes everything needed to improve your cell signal, cell signal booster, antennas, and coax cable.  The weBoost 471104 Connect 4G-X cell signal booster has a strong, durable metal case with N-Female connectors.
Special Note: The booster is fully automatic and requires no adjustment.

This kit is Highly Recommended for...

The weBoost 471104 Connect 4G-X Cell Phone Booster is highly recommended for any large home or small business that requires an improved cell signal.  The three interior antennas are excellent  for irregular shape buildings. If you have any questions about this kit or how it will work in your environment, feel free to contact Powerful Signal, one of weBoost's largest dealers with full service and technical support.

System Configuration

The weBoost 471104 home and small office kit has been configured for quick and easy installation.  The kit includes 4G LTE antennas, low loss 400 commercial grade coax, and the weBoost 471104 5-band amplifier.  Antenna installation is required.  No tools are required to connect components together.  The exterior and interior antennas are connected to the weBoost cell signal booster with 400 low loss coax.

weBoost Connect 4G-X System Components

Following are the components that are included with the weBoost 471104 Connect 4G-X Kit.
  • weBoost 471104 Cell Phone Booster Booster 
  • 1 weBoost 311135 4G interior panel antenna
  • 2 wide-band additional interior panel antenna
  • Wide-band 4G exterior directional antenna
  • 60' 400 coax
  • 3x75' 400 coax
  • 2' jumper to connect 3-way splitter to booster
  • Three way splitter
  • FREE Universal J-Pipe Exterior Antenna Mount ($20 Value)
  • FREE Lightning Surge Protector ($50 Value)
  • Installation Guide

Interior Panel Antennas

The panel antennas have a directional broadcast.  The panel antenna is wide-band and handles all frequencies of the weBoost Connect 4G-X cell signal booster.  The panel antenna can be placed on a wall facing across the room on laid above the ceiling sheet rock and pointed downwards.  The antenna will broadcast down through the ceiling sheet rock if you choose to mount the antenna in the attic.

Exterior Directional Antenna

A weBoost wide-band directional antenna is supplied with the weBoost Connect 4G-X Kit.  This directional antenna connects easily to the 400 low loss coax.  The weBoost directional antenna needs to be pointed in the direction of the cell phone towers for best performance.  It comes with mounting hardware that allows it to be mounted to a 2" pole or a Universal J-Pipe mount.

weBoost Coax Cable

High quality 400 low loss coax cable comes with the weBoost Connect 4G-X Kit.  Each piece of coax cable is pre-cut and terminated with N-Male connectors that easily connect to the amplifier and antennas without any tools, just hand tighten.  Four lengths of coax are supplied, one to run from the amplifier to the outside antenna, one (2ft jumper) to run from the amplifier to the 3-way splitter, three to run from the 2-way splitter to each of the inside antennas.
Special Note: DO NOT coil coax.  It will cause performance problems with the system.

Universal J-Pipe Mount

Included with this kit is a universal J-Pipe exterior antenna mount.  This mount allow the exterior antenna to be easily mount on horizontal, vertical or slanted surfaces.  The purpose is to make it easy to position the antenna and point it in the direction of the cell tower.

Lightning Surge Protector

The Lightning Surge Protector is an important item that is also included in this kit by Powerful Signal.  This is usually mounted between the exterior antenna and the coax that runs down to the cell signal booster.  It protects sensitive electronic equipment from static and lightning hits.


  weBoost Connect 4G-X Cell Phone Booster Specifications

Product Number 471104
Antenna Connectors N-Female
Antenna Impedance 50 Ohms
Weight 2.8 lbs / 1.27 kg
Dimensions 8.875 x 6.0 x 1.5 in / 22.5 x 15.2 x 3.8 cm
Frequency 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755 / 2110-2155 MHz
Power output for a single phone (uplink) dBm

Maximum Power

Power output for a single phone (dBm)
700 MHz
Band 17
700 MHz
Band 13
800 MHz
1900 MHz
1700 MHz
-0.4 -2.1 -2.0 -1.4 0.9
Noise Figure (typical downlink/uplink 7 dB nominal
Isolation > 90 dB
Power Requirements 110-240 V AC, 50-60 Hz, 20W
FCC Notice This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. 

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.