Wilson weBoost Connect 4G-X 471104 Building Cell Phone Booster (Two Antennas)

Wilson weBoost Connect 4G-X 471104 Building Cell Phone Booster (Two Antennas)


Home/Small Office - 4G - 2 Panel Antennas
Price::
$1,099.95
Item Number:
471104-2
2 Antenna 4G Home/Building System (Bonus Accessories)
free shipping
Extended Warranty

Wilson Electronics weBoost Connect 4G-X (471104) 2 Antenna Cell Phone Booster Kit

Highlights

  • Boosts 2G/3G/4G LTE signal (voice and data)
  • FREE J-Pipe and Surge Protector ($70 Value)
  • Configured with 2 panel antennas
  • Broadcast boosted signal in 2 different locations
  • Automatic Adjustment
  • Works well in rectangular or irregular shaped environments

Overview

This two (2) antenna Wilson Electronics weBoost Connect 4G-X 471104 cell phone booster has two interior panel antennas for more coverage that works with Verizon, AT&T, Sprint, and T-Mobile to boost 2G, 3G, and 4G voice and data signals for a small building.  This product is eligible for extended warranty.
 
 
 
 
Sample diagram of 2 antenna installation
 
This cell phone booster works well in homes or small building environments.  This is a complete kit that includes everything needed to improve your cell signal, cell signal booster, antennas, and coax cable.  The weBoost 471104 Connect 4G-X cell signal booster has a strong, durable metal case with N-Female connectors.  The booster is fully automatic and requires no adjustment.
 
 

How should this kit be used

The Wilson Electronics weBoost 471104 Connect 4G-X is highly recommended for any large home or small business that requires an improved cell signal.  The two interior panel antennas are excellent  for irregular shape buildings.  Panel antennas can be mounted on a wall or placed above the ceiling sheetrock and pointed downwards into the room below.  The signal will pass through normal, single layer sheetrock.  Powerful Signal also has a weBoost Connect 4G-X 2 dome kit configured with dome antennas that are designed to be located in the middle of a room.
 
 
If you have any questions about this kit or how it will work in your environment, feel free to contact Powerful Signal, one of weBoost's largest dealers with full service and technical support.
 

Carriers Supported

  • All US 3G/4G Carriers: Verizon, AT&T, Sprint, T-Mobile, US Cellular, Metro-PCS, etc.
  • All Canadian 3G/4G Carriers: Rogers, Bell, Telus, Wind, etc.
 

Kit Includes

  • Wilson Electronics weBoost 471104 Cell Phone Booster Booster 
  • 1 Wilson Electronics 311135 4G interior panel antenna
  • 1 wide-band additional interior panel antenna
  • Wide-band 4G exterior directional antenna
  • 60' 400 coax
  • 2x75' 400 coax
  • 2' jumper to connect 2-way splitter to booster
  • two way splitter
  • Universal J-Pipe Exterior Antenna Mount
  • Lightning Surge Protector
  • FREE J-Pipe and Surge Protector ($70 Value)

Features

  • Boosts both 3G and 4G cell signal (voice and data)
  • Automatic Adjustment control
  • Engineered and Assembled in the US
  • Lifetime Support from Powerful Signal
  • Metal Amplifier Case
  • Commercial grade 400 coax cable
  • No physical connection to cell phones or data cards
  • Supports multiple phone and data cards
  • FCC and IC approved
  • 30 day return policy
  • 2 Year Manufacturer Warranty
  • Free Shipping

Interior Panel Antennas

The panel antennas have a directional broadcast.  The panel antenna is wide-band and handles all frequencies of the weBoost Connect 4G-X cell signal booster.  The panel antenna can be placed on a wall facing across the room on laid above the ceiling sheet rock and pointed downwards.  The antenna will broadcast down through the ceiling sheet rock if you choose to mount the antenna in the attic.
 

Exterior Directional Antenna

A weBoost wide-band directional antenna is supplied with the weBoost Connect 4G-X Kit.  This directional antenna connects easily to the 400 low loss coax.  The weBoost directional antenna needs to be pointed in the direction of the cell phone towers for best performance.  It comes with mounting hardware that allows it to be mounted to a 2" pole or a Universal J-Pipe mount.
 

weBoost Coax Cable

High quality 400 low loss coax cable comes with the weBoost Connect 4G-X Kit.  Each piece of coax cable is pre-cut and terminated with N-Male connectors that easily connect to the amplifier and antennas without any tools, just hand tighten.  Four lengths of coax are supplied, one to run from the amplifier to the outside antenna, one (2ft jumper) to run from the amplifier to the 2-way splitter, two to run from the 2-way splitter to each of the inside antennas.
 
Special Note: DO NOT coil coax.  It will cause performance problems with the system.
 

Universal J-Pipe Mount

Included with this kit is a universal J-Pipe exterior antenna mount.  This mount allow the exterior antenna to be easily mount on horizontal, vertical or slanted surfaces.  The purpose is to make it easy to position the antenna and point it in the direction of the cell tower.
 

Lightning Surge Protector

The Lightning Surge Protector is an important item that is also included in this kit by Powerful Signal.  This is usually mounted between the exterior antenna and the coax that runs down to the cell signal booster.  It protects sensitive electronic equipment from static and lightning hits.
 

 


  weBoost Connect 4G-X Specifications

Product Number 471104
Antenna Connectors N-Female
Antenna Impedance 50 Ohms
Weight 2.8 lbs / 1.27 kg
Dimensions 8.875 x 6.0 x 1.5 in / 22.5 x 15.2 x 3.8 cm
Frequency 698-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755 / 2110-2155 MHz
Power output for a single phone (uplink) dBm

Maximum Power

Power output for a single phone (dBm)
Uplink
Downlink
700 MHz
Band 17
23.2
700 MHz
Band 13
23.8
800 MHz
(Cellular)
25.2
1900 MHz
(PCS)
23.3
1700 MHz
(AWS)
24.9
-0.4 -2.1 -2.0 -1.4 0.9
Noise Figure (typical downlink/uplink 7 dB nominal
Isolation > 90 dB
Power Requirements 110-240 V AC, 50-60 Hz, 20W
FCC Notice This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. 

Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.