Browse by Manufacturer
| | |
|
| |
| | |
Product Category
Corporate Check or Wire Transfer
|
Top Signal 75 Pro Dual Band Repeater Kit
 Top Signal 75 Pro Dual-Band Booster Kit Top Signal 75 Pro Amplifier - Side Top Signal 75 Pro Amplifier - Front Top Signal 75 Pro Amplifier - Top |
|
Highly Recommended
Item Number: TS112752K
Installation Option
|
Professional Installation
You can select this product to be professionally installed by selecting "Add Onsite Installation". Please read the Installation Policy for more information or contact Powerful Signal for details |
|
Product Description
The newly designed TopSignal 75 Pro Dual-Band (800/1900MHz) Repeater is designed for larger homes, small offices, warehouses, small businesses, etc. This advanced 75dB gain dual-band amplifier improves 2G and 3G cell signal strength and coverage inside buildings. It works with any CDMA, GSM, or TDMA carrier that uses 800/1900MHz frequencies. This includes Verizon, AT&T, Sprint, T-Mobile, Alltel, US Cellular and other carriers. Both the 800Mhz and 1900Mhz frequency gain are independently adjustable so system coveage can be configured for a variety of building and home environments.
Coverage
Metal, concrete, stucco, and some types of coated window glass inhibit cell signals and reduce your cell signal strength in a home or office. There is a direct relation between outside cell signal strength and interior coverage. The stronger the outside signal, the more coverage the system can create inside your home or office. Low signal outside (-95dB, 1 bar) will allow the system to cover about 2,000 to 2,500 square feet on 1900MHz PCS and about 5,000 to 10,000 square feet on 800MHz cellular. A stronger signal outside (-85dB, 4 bars) will allow the system to cover about 5,000 to 10,00 square feet on 1900MHz PCS and about 15,000 to 20,000 squate feet on 800MHz Cellular.
When larger areas are being covered, 10,000+ square feet, it is advisable to use multiple antennas to balance the system more evenly. Contact Powerful Signal and we will design the larger systems for you at no charge.
The 800Mhz frequency travels about twice as far as 1900MHz frequency so there is always better coverage with carriers that use 800Mhz. This is true with any dual-band 800/1900Mhz amplifier.
Kit Contents
The TS112752K kit is complete with everything needed for a home or small office installation. This 75dB cell signal booster kit includes the following:
-
Top Signal 75 Pro dual-band 75dB amplifier and wall plug power supply
-
Top Signal 210502 22 inch omni-directinal exterior Antenna
-
Top Signal wide-band dome interior antenna to broadcast cell signal inside building
-
30ft Top Signal 400 Coax
-
50ft Top Signal 400 Coax
-
Top Signal Universal J-Pipe Mount (extra $20 value)
-
Top Signal Lightning Surge Protector (extra $50 value)
Features
- FCC certified amplifier
-
ALC - Automatic Level Control to adjust the gain of the amplifier depending upon the strength of the input signal.
-
Oscillation Detection - shuts amplifier off if antennas are mounted too close to each other.
-
Adjustable gain control
-
Commercial grade high quality low loss 400 coax
Before leaving the factory, each Top Signal 75 Pro amplifier is individually tested during the QC process to ensure high quality performance. The TopSignal 75dB Repeater improves signal strength for both cell phones and 2G/3G data cards, helping them to stay connected farther away from the tower. This kit works with all carriers that use GSM, CDMA, and TDMA in the 800MHz and 1900MHz frequencies.
Special Note: The Top Signal 75 Pro dual-band amplifier runs at a full 75dB gain. Other manufacturers advertise 75dB amplifiers that have a 75dB maximum gain, but run 65dB typical gain.
|
TopSignal 75 Pro Repeater (TS112752)
The TopSignal 75 Pro is a full 75dB dual-band (800/1900MHz) repeater with a heavy-duty industrial class metal case for protection and component isolation. Industry standard N-Female connectors are used for all connections. Both connectors are located on the top of the amplifier for easy access. The amplifier has indicator lights and gain adjustment switches on the front for easy operation.
|
Top SIgnal TS112752 75dB Pro
|
Antennas
The Top Signal 75 Pro Kit comes with commercial grade antennas. These are the same antennas used in large commercial buildings. The interior dome antenna can be placed in the attic on top of the ceiling sheet rock in a home or easily attached to a dropped ceiling in a office. The exterior 22" fiberglass antenna comes with U-bolts for rooftop mounting.
|
Interior Dome - Exterior 22" Omni
|
400 Coax
There is no cutting corners with the coax supplied with the Top Signal 75 Pro kit. High quality commercial grade low loss 400 coax is provided. Some other manufacturers choose to use low quality coax which has much greater signal loss. 400 coax has about a 4dB loss per 100ft on 800Mhz. Other types of coax may have double or triple the loss which will significantly reduce the interior coverage area. Each coax cable is terminated with N-Male connectors. Just hand-tighten to amplifier and antennas.
|
30' and 50' low loss 400 coax
|
Universal J-Pipe Mount ($20 Value)
The Top Signal 75 Pro Kit comes with a Top Signal Universal J-Pipe mount used to mount the 22" omni antenna on the roof or side of a building. This universal J-Pipe mount adjusts to any angle of roof for easy exterior antenna mounting.Also included is a lightning surge protector installed on the end of the outside antenna pigtail. This helps protect the amplifier for static and lightning strikes.
|
Universal J-Pipe Mount
|
Lightning Surge Protector ($50 Value)
A lightning surege protector is supplied with this Top Signal 75 Kit. This helps protect your cellular amplifier investment from lightning and static charges. Easily insterts between the exterior coax cable and the exterior antenna.
|
|
2nd Antenna Option
An option for a 2nd interior antenna (additional price) is available for this system. If selected, 4 additional components are added: another interior antenna, another interior coax, 3 way splitter, and a 2' jumper.
2-Way Splitter and Jumper (for additional antenna)
A 2 way splitter is provided. It is connected to the amplifier with a 2' jumper. The 2 output ports of the splitter are used to connect to each interior antenna.
|
|
Specifications
|
Frequency Range PCS 1900
|
Dn Link: 1930-1990MHz
Up Link: 1850-1910MHz
|
|
Frequency Range Cellular 800
|
Dn Link: 869-894MHz
Up Link: 824-849MHz
|
|
Input Power Limit
|
-33dBm Max
|
|
Output Power - Uplink
|
+20dBm
|
| Output Power - Downlink
|
+17dBm
|
|
Gain
|
75dB (±1dB)
|
|
Noice Figure @ Gain Max
|
<6dB (1900 PCS Uplink)
<5dB (800 Cellular Uplink)
|
|
Power Consumption
|
5.6V dc / 1.7A
|
|
RF Connector
|
N-Female
|
|
Dimensions
|
5.95 x 7.5 x 1.38 in
151 x 191 x 35 mm
|
|
Weight
|
<2.0 kg
|
|
Temperature
|
-30° C - +55°C
-22° F - +131° F
|
|
Humidity
|
10% - 95%
|
|
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
|