Browse by Manufacturer
| | |
|
| |
| | |
Product Category
Corporate Check or Wire Transfer
|
Top Signal 65 Dual-Band Building Repeater
Product Description
This high-quality dual-band 65dB (800/1900MHz) repeater is an automatic 65dB dual-band small building amplifier. The Top Signal 65 has ALC (automatic level control) to control amplifier gain along with automatic shutoff when errors are detected. The TS112651 repeater has been designed to broadcast an improved cell signal into multiple rooms in homes and buildings. Broadcast distance varies depending upon outside cell signal strength, carrier frequency, and type of coax cable used. The Top Signal 65 will automatically adjust to compensate for antenna separation. This amplifier requires antennas and coax and installation.
Special Note: The Top Signal 65 dual-band amplifier runs at a full 65dB gain. Other manufacturers advertise 65dB amplifiers that have a 65dB maximum gain, but run 60dB typical gain.
Components in box:
-
TopSignal 65 dual-band amplifier
-
Wall Plug Power Supply
-
QC test results for amplifier
-
Operation Manual
|
Front view of Top Signal 65dB building amplifier.
|
Coverage Area
Inside coverage distance varies depending upon outside signal strength, carrier frequency (800 or 1900Mhz) and interior obstacles. The Top Signal 65 has been designed to provide approximately 500 to 1,000 sf of coverage in low signal areas (1 bar outside) and up to 5,000 sf in strong signal areas (4-5 bars outside). Note: These calculations are for 1900Mhz. 800MHz will provide more coverage. Please consult with Powerful Signal to determine expected coverage area for your situation.
Antenna Separation
Exterior and interior antennas need to have the proper separation. This is usually about 30+ feet depending upon several variables. The Top Signal 65 has automatic ajustment capability and will adjust to compensate for antenna separation.
-
Obstacles (metal, concrete, etc.) between antennas
-
Difference in height between antennas. Vertical separation is very effective.
Contact Powerful Signal for more information regarding antenna separation. We will help you design your system properly.
Top Signal 65 Amplifier
The Top Signal 65 dual-band (800/1900MHz) cell signal repeater for small buildings has ALC automatic level control to automatically adjust the gain of the amplifier. This adjustability enables the amplifier to easily configure itself for many different building scenarios. The amplifier is fitted with a heavy industrial metal case, ON/OFF power switch, indicator lights and industry standard N connectors. This amplifier is one of our highest quality units and is FCC and IC certified.
|
Side View
|
Top View
|
Specifications
| Frequency Range
|
Cellular 800 Up Link 824-849MHz
Cellular 800 Dn Link 869-849MHz
PCS 1900 Up Link 1850-1910MHz
PCS 1900 Dn Link 1930-1990MHz
|
| Input Power Limit
|
-28dBm
|
| Output Power
|
+12dBm/1FA
|
| Gain
|
65dB(±2dB)
|
| Ripple
|
<5dB (Cellular 800)
<6dB (PCS 1900)
|
| Noise Figure @ Max Gain
|
<8dB
|
| Propagation Delay
|
1us (Max)
|
| Shutdown Level
|
+14dBm
|
| Power Consumption
|
5.3V / 1.4A
|
| Input Voltage
|
DC 5.3V / 1.8A (AC/DC Adapter)
|
| RF Connector
|
N-Female
|
| Repeater Dimensions
|
6.1 x 4.7 x 1.3 in
|
| Weight
|
<1.5 Kg
|
| Operating Temperature
|
-10° C ~ +55° C
|
|
|