Browse by Manufacturer
Product Category
Shopping Cart
Your cart is empty.

Corporate Check or Wire Transfer
 
Registered with the following:
CCR - Central Contractor Reg.
ORCA - Online Representations &
            Certifications Application
D&B - Dun & Bradstreet

   

Mailing Lists

Cellphone-Mate SureCall 80dB Building System

<< Previous in Discontinued Products Next in Discontinued Products >>
SureCall CM2020-80dB Kit
SureCall CM2020-80dB KitCellphone-Mate CM2020-80 AmplifierTop Signal Commercial Directional AntennaTop Signal 22 inch 5dB Omni AntennaTop Signal Dome Antenna
Connector: N-Female
Gain: 80dB
Type: Building
Application: Cellular/PCS, Cellular, PCS, 2G/3G
Manufacturer Warranty: 2 Year

Product Options

free shipping

 

Product Discontinued

Product Description

This dual-band 80dB (800/1900) system uses Cellphone-Mates' largest dual- band building amplifier.  The complete system has been designed to broadcast an improved cell signal into multiple rooms in homes and buildings.  Broadcast distance varies depending upon outside cell signal strength and frequency.  Interior and exterior antennas should be separated a minimum 70+ feet to avoid oscillation between antennas.  This system requires installation.
 
Special Note:  This is a very powerful cell signal repeater. This type of equipment should only be installed by someone with experience with cellular amplifiers or under the direction of someone with experience and product knowlege with this equipment.
 

System Components

  1. CM2020-80 dual-band amplifier
  2. Inside Antenna (ceiling dome or wall panel)
  3. Outside Antenna (Omni or directional)
  4. Coax from amplifier to outside antenna
  5. Coax from amplifier to inside antenna
  6. J-Pipe Universal Antenna Mount
  7. Lightning Surge Protector
 
 
 
Sample installation: Antenna on the roof, amplifier and dome antenna in the attic. 

Installation

Outside antenna needs to be mounted on the roof of your building. Outside antennas are designed to be mounted on a pole (max 2" diameter) using U-bolts. Coax needs to be run from the outside antenna to the amplifier. The amplifier can easily be mounted on a wall in an equipment, utility, or storage room. The inside antenna needs to be mounted on a ceiling (dome) or wall (panel). Coax needs to be run from the inside antenna to the amplifier. Standard wall plug power is required near the amplifier. Antennas do not require power.
 

Coverage Area

Inside coverage distance varies depending upon outside signal strength, carrier frequency (800 or 1900Mhz) and interior obstacles. The CM2020-80 has been designed to provide approximately 7,000 to 10,000 sf of coverage in low signal areas (1 bar outside) and up to 100,000 sf in strong signal areas (4-5 bars outside). Note: These calculations are for 1900Mhz. 800MHz will provide more coverage. Please consult with Powerful Signal to determine expected coverage area for your situation.
 
Multiple antennas can be used with the CM2020-80 to enhance coverage within buildings.  When multiple antennas are used, the system should be deisgned by someone experienced with the equipment.  Powerful Signal will design your system for optimal performance in your environment.
 

Antenna Separation

Exterior and interior antennas need to have the proper separation. This is usually about 70+ feet depending upon several variables.
  • Obstacles (metal, concrete, etc.) between antennas
  • Difference in height between antennas. Vertical separation is very effective.
Contact Powerful Signal for more information regarding antenna separation. We will help you design your system properly.
 
 
 

CM2020-80 Amplifier

The CM2020-80 is Cellphone-Mates largest dual-band (800/1900MHz) cell signal repeater for buildings.  This amplifier has 31dB of adjustment for both 800MHz and 1900MHz along with 31dB of adjustment for both uplink and downlink.  This adjustability enables the amplifier to be easily be configured in many different building scenarios. 
 
Top View of CM2020-68
Top View 
Bottom View of CM2020-68
Bottom View 

Cellphone-Mate Warranty

Cellpone-Mate has a full 2 year warranty on their amplifiers.  Anything goes wrong with your CM2020-80, you are covered.  This is one of the best warranties in the industry.

Exterior Antennas

A choice of two different exterior commercial grade antennas are offered.
  • 5dB gain Omni fiberglass
  • 11dB gain directional
The omni antenna collects signal from 360 degrees, all directions.  This antenna is generally recommended, and it works well in most situations.
 
The directional must be pointed in the direction of the cell tower(s).  This antenna works best when there is a good line-of-site to the cell tower or the terrain is mainly flat or low rolling hills.  Not recommended in low spots or dense forested areas.
 
Both antennas work with 800/1900MHz carriers.  Mounting hardware is included and installation is required.
 
A J-Pipe Universal Antenna Mount is included with the system.  This mount allows the exterior antenna to be easily mounted to a wall or rooftop.
 
  Top Signal Omni Antenna
Top Signal Omni Antenna
Top Signal Directional Antenna
 
J-Pipe &#13;&#10;&#13;&#10;Universal Antenna Mount
J-Pipe Universal Antenna Mount

Interior Antennas

A choice of two different interior antennas is also offered:
  • Top Signal Omni ceiling mount dome
  • Top Signal wall mount panel

The dome is recommended in most situations when an attic or dropped ceiling is available.  A panel is recommended in homes with vaulted ceilings and situations where antennas cannot be mounted on the ceiling.

Top Signal Dome Antenna
Top Signal Dome Antenna 
Top Signal Panel Antenna

Coax

This system provides two lengths of 400 low loss coax.  One length is used from the amplifier to the interior antenna.  The other length is used from the amplifier to the exterior antenna.  Select lengths that best fit your installation environment.  Remember: each foot of coax is signal loss so don't just get the longest length.  Figure what you need and select the length that best fits.  Note:  Never coil excess coax.  It will cause problems.