| Scalable Platform - Easy Implementation for Multi-Floor or Large Environments |
The Powerful Signal Enterprise Platform has been created
to address low cell signal problems in multi-floor high-rise
office buildings and other large commercial structures.
This scalable platform is modularized to allow easy
expansion and roll-out in multi-floor scenarios.
A main amplification unit in conjunction with zone modules
on each floor or main area brings outside cell signals into
the building. One or more interior antennas connected to
each zone module fill each floor or area with strong cell
signals.
The Enterprise Platform has been designed so it can be
easily installed and implemented by building maintenance
personnel. Powerful Signal will do the design work and
deliver a complete solution that includes amplifiers,
antennas and pre-cut coax.
to address low cell signal problems in multi-floor high-rise
office buildings and other large commercial structures.
This scalable platform is modularized to allow easy
expansion and roll-out in multi-floor scenarios.
A main amplification unit in conjunction with zone modules
on each floor or main area brings outside cell signals into
the building. One or more interior antennas connected to
each zone module fill each floor or area with strong cell
signals.
The Enterprise Platform has been designed so it can be
easily installed and implemented by building maintenance
personnel. Powerful Signal will do the design work and
deliver a complete solution that includes amplifiers,
antennas and pre-cut coax.
Product Description
The Powerful Signal Enterprise Platform is a scalable,
modular platform which allows floors and zones to be
added to expand cellular coverage areas within large
commercial buildings.
Enterprise Platform Components:
Outside Antenna - Connected to EAU
An outside antenna needs to be mounted on a pole onthe roof of your building. No power is required for the
outside antenna. Coax needs to be run from the outside
antenna to the EAU.
Enterprise Amplifier Unit - EAU
The Powerful Signal Enterprise Platform is dual-band
and works with all CDMA and GSM carriers that use
800/1900MHz frequencies. The Enterprise Amplifier Unit
(EAU) is adjustable for both 800MHz and 1900Mhz
frequencies. Usually only one EAU is required per
system. The EAU (approx 16 lbs) has been designed to
be mounted on a wall space of approximately 18" x 24".
The front of the EAU opens to provide easy access to all
components. Power (110V) is required for EAU.
Enterprise Zone Module - EZM
An Enterprise Zone Module (EZM) is installed on each
building floor or in each major zone. The adjustable EZM
is used to control signal broadcast on each floor or zone.
One or more internal dome/panel antennas are
connected to each EZM to allow cell signals to be
broadcast throughout the zone. A minimum of 50' to 75'
of separation is required between each interior antenna.
All EZM's are connected together in-line to form the
backbone of the system. The string of EZM's is
connected to the main EAU. The EZM (approx 13 lbs)
has also been designed to be mounted on a wall space
of approximately 18" x 24". The front of the EZM opens to
provide easy access to all components. Power (110V) is
required for each EZM.
Enterprise In-Line Module - EIM
Enterprise In-line Modules (EIM) are sometimes needed
when extra long coax runs are required between zones.
The EIM boosts signal for long runs between two EZM's
or between an EAU and the first EZM. Power (110V) is
required for each EIM.
Inside Antennas - Connected to EZM
Inside antennas are mounted on the ceiling (dome) or
wall (panel). Dome antennas can easily be installed on
most commercial grid flat tile ceilings. Coax needs to be
run from each inside antenna to the associated EZM.
Antennas do not require any power.
Coverage Area (please read)
Inside coverage distance varies depending upon outside
signal strength, carrier frequency, interior obstacles, coax
length and the number of interior antennas used. The
Enterprise System has been designed to provide
coverage to multi-floor high rise buildings or large
commercial spaces above 50,000 square feet. Please
consult with Powerful Signal to determine expected
coverage area for your situation.
In-building design assistance is available from Powerful
Signal. We will work with you on your small or large cell
signal problem. We have the experience and the product
knowledge to help you solve your problem.
Antenna Separation
Outside antenna and inside antenna(s) need to be
separated approximately 75+ feet depending upon
conditions. Inside dome antennas need approximately
50' to 75+ feet of separation. If concrete or metal is
between antennas, then less separation distance is
needed. Contact Powerful Signal if you have any
questions in this area. Our building experts will be glad
to assist you.
Pricing
The Powerful Signal Enterprise platform is extremely
affordable. Pricing varies depending upon number of
floors or size of zones. Powerful Signal will prepare a
prompt price estimate based upon information provided
to us.
Support and Installation
Installation is relatively straight forward. Powerful Signal
will design your system and provide technical support
from start to end of implementation. Powerful Signal
does not physically install the system, but we will work
with your maintenance or installation company to insure
proper installation. Call us and let us show you an
affordable solution to solve your cell signal problem.
The Powerful Signal Enterprise Platform is a scalable,
modular platform which allows floors and zones to be
added to expand cellular coverage areas within large
commercial buildings.
Enterprise Platform Components:
 | EAU - Enterprise Dual-band Amplifier Unit | |
| EZM - Enterprise Zone Module (Dual-band) | |
| EIM - Enterprise In-line Module (as needed) | |
| Inside Antennas (Domes and Panels) | |
| Outside Antenna (Directional or Omni-Directional) | |
| Pre-cut Coax with connectors |
Outside Antenna - Connected to EAU
An outside antenna needs to be mounted on a pole on
outside antenna. Coax needs to be run from the outside
antenna to the EAU.
Enterprise Amplifier Unit - EAU
The Powerful Signal Enterprise Platform is dual-band
and works with all CDMA and GSM carriers that use
800/1900MHz frequencies. The Enterprise Amplifier Unit
(EAU) is adjustable for both 800MHz and 1900Mhz
frequencies. Usually only one EAU is required per
system. The EAU (approx 16 lbs) has been designed to
be mounted on a wall space of approximately 18" x 24".
The front of the EAU opens to provide easy access to all
components. Power (110V) is required for EAU.
Enterprise Zone Module - EZM
An Enterprise Zone Module (EZM) is installed on each
building floor or in each major zone. The adjustable EZM
is used to control signal broadcast on each floor or zone.
One or more internal dome/panel antennas are
connected to each EZM to allow cell signals to be
broadcast throughout the zone. A minimum of 50' to 75'
of separation is required between each interior antenna.
All EZM's are connected together in-line to form the
backbone of the system. The string of EZM's is
connected to the main EAU. The EZM (approx 13 lbs)
has also been designed to be mounted on a wall space
of approximately 18" x 24". The front of the EZM opens to
provide easy access to all components. Power (110V) is
required for each EZM.
Enterprise In-Line Module - EIM
Enterprise In-line Modules (EIM) are sometimes needed
when extra long coax runs are required between zones.
The EIM boosts signal for long runs between two EZM's
or between an EAU and the first EZM. Power (110V) is
required for each EIM.
Inside Antennas - Connected to EZM
Inside antennas are mounted on the ceiling (dome) or
wall (panel). Dome antennas can easily be installed on
most commercial grid flat tile ceilings. Coax needs to be
run from each inside antenna to the associated EZM.
Antennas do not require any power.
Coverage Area (please read)
Inside coverage distance varies depending upon outside
signal strength, carrier frequency, interior obstacles, coax
length and the number of interior antennas used. The
Enterprise System has been designed to provide
coverage to multi-floor high rise buildings or large
commercial spaces above 50,000 square feet. Please
consult with Powerful Signal to determine expected
coverage area for your situation.
In-building design assistance is available from Powerful
Signal. We will work with you on your small or large cell
signal problem. We have the experience and the product
knowledge to help you solve your problem.
Antenna Separation
Outside antenna and inside antenna(s) need to be
separated approximately 75+ feet depending upon
conditions. Inside dome antennas need approximately
50' to 75+ feet of separation. If concrete or metal is
between antennas, then less separation distance is
needed. Contact Powerful Signal if you have any
questions in this area. Our building experts will be glad
to assist you.
Pricing
The Powerful Signal Enterprise platform is extremely
affordable. Pricing varies depending upon number of
floors or size of zones. Powerful Signal will prepare a
prompt price estimate based upon information provided
to us.
Support and Installation
Installation is relatively straight forward. Powerful Signal
will design your system and provide technical support
from start to end of implementation. Powerful Signal
does not physically install the system, but we will work
with your maintenance or installation company to insure
proper installation. Call us and let us show you an
affordable solution to solve your cell signal problem.
Enterprise System Components
- Enterprise Amplifier Unit (EAU)
- Enterprise Zone Module(s) (EZM)
- Enterprise In-line Module (EIM) (as needed)
- Choice of exterior dual band cellular antenna
- PS01004 5dB Omni-Directional Antenna
- PS01001 9dB Direction Antenna
- Choice of interior dual band cellular antennas
- PS01003 Ceiling Dome antenna or
- PS01002 Wall Panel Antenna
- Ultra Low-Loss Coax (pre-cut with connectors)
- Taps and splitters as needed
- Lightning Surge Protector for outside antenna
- Setup Guide
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Powerful Signal Enterprise Platform |
| Dual Band Inside Dome Antenna |
| Dual Band Inside Panel Antenna |
| OR |
Exterior Antenna Options
Interior Antenna Options
| PS01004: 22" 5dB Gain Omni Directional Dual-Band Fiber Glass Pole Mount |
| PS01001: 9dB Gain Dual-Band Directional Pole Mount Antenna. 87 degree horizontal beam. |
| Enterprise Wall Mount Amplifier Unit |
| Copyright (c) 2007-2010 Powerful Signal LLC Contact | About Us | Shipping | Questions | Privacy Policy | Return Policy | Blog |
| Designed for larger commercial buildings. |
Commercial
Government
| High-rise offices | |
| Parking Garages | |
| Basement Floors | |
| Underground Facilities | |
| Distribution Centers | |
| Manufacturing Facilities |
Government
| Bunkers | |
| Hangers | |
| Ships | |
| Barracks | |
| Storage Facilities | |
| Outside Antenna (Usually on the roof) |
| Enterprise Amplifier Unit (EAU) usually on top floor or near where the outside antenna is mounted. |
| One or more interior antennas are connected to each EZM. |
| Example of Multi-Floor Implimentation |
| Enterprise Zone Modules (EZM) are positioned on each floor or zone. One or more interior antennas are connected to each EZM. |
| Enterprise In-Line (EIM) Modules are used to boost cell signal on the backbone when long coax runs are required between EZM's |
| Multiple EZM's are connected together between floors or zones. Scalable system allows for easy expansion. |
| Contact Powerful Signal for a price quote. We will design your Enterprise System specific for your environment. |
| Toll Free 866-912-3444 Direct 435-628-5984 |