Wilson 801165, 801365 65 dB Single Band Building System |
The Wilson 65 dB Large Building Kit amplifies and boosts cell signals and has been configured
with a 65 dB amplifier for larger homes, offices and buildings. This is a complete building kit that
includes everything you need, amplifier, antennas and commercial grade cabling.
This kit has the option of several different frequencies. You will need to know your frequency.
Contact your carrier to help you determine the frequency you need.
You can also visit www.wireless advisor.com for a list of frequencies by zip code.
with a 65 dB amplifier for larger homes, offices and buildings. This is a complete building kit that
includes everything you need, amplifier, antennas and commercial grade cabling.
This kit has the option of several different frequencies. You will need to know your frequency.
Contact your carrier to help you determine the frequency you need.
You can also visit www.wireless advisor.com for a list of frequencies by zip code.
Product Description
The Wilson wireless 65 dB Building Kit contains a high
quality Wilson Electronic amplifier of your choice. It is
designed for homes or offices. If your signal coverage is
weak inside your building, this kit can help solve your
problem.
The kit comes with all cellular components needed,
exterior antenna, interior ceiling mount dome or wall
mount panel antenna, Wilson amplifier, coax, and power
supply. Coax for this kit is ultra low loss LMR400,
complete with N connectors ready to connect to the
amplifier and antennas.
This kit is has amplifier options that can be used with
carriers that operate using 800MHz, 1900MHz or iDEN.
You should check which frequency your carrier uses at
your building location. Your carrier can help you
determine this.
Mounting and installation is required with this kit.
In-building design assistance is available from Powerful
Signal. We will work with you on your small or large cell
signal problem. We have the experience and the product
knowledge to help you solve your problem.
Antenna Separation
Exterior and Interior antennas need to have the proper
separation. This is usually about 50-75 feet depending
upon several variables. Contact Powerful Signal for
more information regarding antenna separation.
The Wilson wireless 65 dB Building Kit contains a high
quality Wilson Electronic amplifier of your choice. It is
designed for homes or offices. If your signal coverage is
weak inside your building, this kit can help solve your
problem.
The kit comes with all cellular components needed,
exterior antenna, interior ceiling mount dome or wall
mount panel antenna, Wilson amplifier, coax, and power
supply. Coax for this kit is ultra low loss LMR400,
complete with N connectors ready to connect to the
amplifier and antennas.
This kit is has amplifier options that can be used with
carriers that operate using 800MHz, 1900MHz or iDEN.
You should check which frequency your carrier uses at
your building location. Your carrier can help you
determine this.
Mounting and installation is required with this kit.
In-building design assistance is available from Powerful
Signal. We will work with you on your small or large cell
signal problem. We have the experience and the product
knowledge to help you solve your problem.
Antenna Separation
Exterior and Interior antennas need to have the proper
separation. This is usually about 50-75 feet depending
upon several variables. Contact Powerful Signal for
more information regarding antenna separation.
| System Components |
| Related Products |
Complete system for Cellular (65dB), PCS (65dB) or iDEN (60dB) |
Kit Contents
- Your choice of Wilson amplifier (1 amp)
- Wilson 801165 - 65 dB 800MHz
- Wilson 801365 - 65 dB 1900 MHz
- Wilson 804006 - 60 dB Nextel/iDEN
- Choice of Outside Antenna
- High Gain Directional Yagi Antenna
- 5dB Omni-Directional Pole
- You choice of inside cellular antenna (1 antenna)
- PS01003 Dome ceiling mount antenna
- PS01002 Panel wall mount antenna
- AC power supply
- Two lengths of low loss 400 coax (your choice)
- Installation Guide
Product Information
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Interior Antenna Options
A choice of two different interior antennas are offered with
this kit, an omni-directional dome cellular antenna
designed to be mounted on the ceiling. The ceiling
antenna broadcasts in a 360 degree pattern, both around
and down. The panel is a bit stronger and has a
directional broadcast, about a 70 degree horizontal
pattern and about a 45 degree vertical pattern.
Exterior Antenna Options
A choice of outside antenna is offered. The PS01004 is a
omni-directional pole mount antenna that gathers signal
from 360 degrees. The Yagi is a high gain directional
antenna that gathers signal in a narrow beam.
The PS01004 is a good all-around antenna especially in
hilly and mountainous areas. The directional Yagi is
best used in low signal situations with flat or low rolling
hills.
A choice of two different interior antennas are offered with
this kit, an omni-directional dome cellular antenna
designed to be mounted on the ceiling. The ceiling
antenna broadcasts in a 360 degree pattern, both around
and down. The panel is a bit stronger and has a
directional broadcast, about a 70 degree horizontal
pattern and about a 45 degree vertical pattern.
Exterior Antenna Options
A choice of outside antenna is offered. The PS01004 is a
omni-directional pole mount antenna that gathers signal
from 360 degrees. The Yagi is a high gain directional
antenna that gathers signal in a narrow beam.
The PS01004 is a good all-around antenna especially in
hilly and mountainous areas. The directional Yagi is
best used in low signal situations with flat or low rolling
hills.
iDEN Users Please Note: The iDEN option for
this system is a 60dB amplifier and uses only the
800MHz frequency. Some iDEN systems require
900MHz. Before purchasing any iDEN product from this
website, please contact your carrier to find out which
frequency you are using. The iDEN amplifier option on
this kit will NOT work on 900MHz iDEN frequencies.
this system is a 60dB amplifier and uses only the
800MHz frequency. Some iDEN systems require
900MHz. Before purchasing any iDEN product from this
website, please contact your carrier to find out which
frequency you are using. The iDEN amplifier option on
this kit will NOT work on 900MHz iDEN frequencies.
| 866-912-3444 |
| Ceiling Dome |
| Wall Panel |
| OR |
| Inside Antenna Options |
| Outside Antenna Options |
| 22" 5dB Gain Omni-Directional Dual-Band Fiber Glass Pole Mount |
| Wilson 301124 1900MHz Yagi |
| OR |
| Coax |
| Wilson signal band amplifier, 800MHz or 1900MHz or iDEN 800MHz. |
Two lengths of coax are provided in this system. One to
go from the amplifier to inside antenna, the other to go
from the amplifier to the outside antenna.
go from the amplifier to inside antenna, the other to go
from the amplifier to the outside antenna.
| Copyright (c) 2007-2009 Powerful Signal LLC Contact | About Us | Shipping | Questions | Privacy Policy | Return Policy | Blog |
| Wilson 301129 800MHz Yagi |
| Directional Yagi Antennas |