AT&T 4G LTE Building Repeater Kit

This AT&T 4G LTE system has been designed to amplify and improve weak AT&T LTE signal in a a small home or office. Low loss 400 coax is included.  Interior and exterior antennas should be separated 40+ feet to avoid oscillation and noise between antennas.

 

This Powerful Signal 70dB system is compatible with AT&T LTE running on 728-746/698-716 MHz.  It can be used in conjuction with other building repeaters using 800MHz and 1900MHz GSM and CDMA carriers.  This system improves AT&T LTE data communications in your home or office.  Broadcast distance from the interior antenna varies depending upon outside signal strength and internal building obstacles.  Contact Powerful Signal for additional information on how this system will work in your environment.

 

Note:  Usable outside 4G LTE signal (1-2 bars) is required in your area from your carrier.  The objective is to bring usable 4G LTE signal into your building for 4G devices.

 

 

 

CM700A-70 AT&T 4G LTE Amplifier The Cellphone-Mate CM700A-70 is a 70dB gain amplifier for AT&T LTE.  It has oscillation detection to assist in setting up the exterior and interior antennas.  The amplifier has 31dB of uplink and downlink adjustability in 1 dB increments.   This well-built, FCC certified amplifier with a 2 year manufacturers warranty works well in small homes or small offices.	Top View	Side View
Exterior Antenna  This wide band antenna is designed for use with 4G LTE frequencies.  This omni directional LTE 4G collects signal from all directions in 360°.   Mounting hardware is included for up to a 2" pole or wall.  Mounting is required.	Top Signal Omni Antenna
Interior Antenna Top Signal ceiling mount dome.  The dome, which is designed to handle AT&T 4G LTE (700MHz), is recommended in most situations when an attic or dropped ceiling is available.  This dome can be mounted on a ceiling or on a wall.  Mounting hardware is included for both ceiling and wall.	Ceiling Mount Dome	shown mounted with wall bracket
Coax This system provides two lengths of 400 low loss coax.  One length from the exterior antenna to the amplifier.  The other length from the amplifier to the interior antenna. Select the lengths that best fit your environment.  Each foot of coax is signal loss, so don't just select the longest length.  Figure what you need and select the length that best fits.